Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
problem one is the timer control for the heaters ,also check the heaters that they are working ,oil problem ? look under the rubber boot that goes over the oil switch ,pull it back and if oil under the cover renew the oil switch,these motors do suffer from heater light flashing on and i know people have spent megabucks trying to cure it ,its a fault with dash and printed circuits ,but the heaters are not coming on i know because i have driven one with the heater circuit light coming on and i had a extended light on a long wire and the heaters are not coming on ,ignore it just renew the faulty glow plugs,as for EGR valve just pull teh vacumn pipe off the ERG valve and leave disconnect ,more hassle than its worth changing it ,you could end up with a ECU computer .Still a nice reliable motor though and economical
Posted on Jan 21, 2010
Testimonial: "Thanks for your usefull answer. Afer I stop the engine 2 times from EGR valve, both board alarms have been reseted. What does it mean? Thanks again."
I have no idea what a skoda octavia is, but I know brakes are brakes. You have 2 bolts holding the pads in a slide, the bolts have threads only at the top, the rest is the slide, pull those bolts, if that doesn't release the slide, take out the 2 bolts holding the caliper on there, pull the slide out the other way. replace the pads, make sure they go back in the way came out. Put the bolts back on, tighten them up, you should be all set. The pad thickness sensor is just a ground, when the wire hits metal, it turns on a light, It should go off when it is not touching anything. You should have squealers on there too, they give an audible screech telling you it is time for some new pads. Hope this helps.
Posted on Apr 26, 2010
SOURCE: skoda octavia 1.9 tdi
lods have a problem it a skoda 19tdi no power when i give it the boot 80 km only turbo kicking in ok changed air flow , washed out boost valve, would u think the timing is out
Posted on Jul 01, 2010
Tips for a great answer:
Jan 28, 2014 | 2005 Skoda Octavia 1.9
on Feb 04, 2015 | Skoda Octavia Cars & Trucks
Dec 15, 2013 | 2006 Skoda Octavia 1.4
Nov 21, 2013 | 2006 Skoda Octavia 1.9
Oct 21, 2013 | Skoda Octavia Cars & Trucks
Apr 16, 2013 | 2005 Skoda Octavia 1.9
Oct 21, 2012 | 1996 Skoda Octavia
May 15, 2012 | Skoda Octavia Cars & Trucks
Jun 16, 2010 | Volkswagen Golf Cars & Trucks
Aug 24, 2017 | Chevrolet Cars & Trucks
397 people viewed this question
Usually answered in minutes!