Question about 2001 Buick LeSabre

Open Question

2001 Buick lesabre vacuum line diagram

Vacuum lines

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: VACUUM HOSE DIAGRAM FOR 1987 BUICK REGAL GRAND NATIONAL

sign up at turbobuick.com (it's free) then find out who lives near you and check out their car...take some pictures and notes...btw there are a ton of members and I'm willing to bet someone lives near you and most are more than willing to help out a fellow turbo buick owner..or try the link at the bottom...any problems shoot me an email at Mansfieldroof@aol.com

http://www.installationinstructions.com/vin9/vacuum%20hose%20system.pdf

Posted on Jun 16, 2009

Ad
  • 41 Answers

SOURCE: 1997 Buick LeSabre Limited Edition, Dash vents do not blow air

ck to see if the mode vaccum actuator is getting vaccum, you will need to test actuator with a hand held vaccum gun, if actuator has failed you will need to replace, if actuator holds vaccum and it does not move the door your door may be out of position inside case or something could hold it locked in position. you will need to check door by hand to see if it moves freely.

Posted on Aug 03, 2009

Murphybanton
  • 2004 Answers

SOURCE: need spark plug diagram for 1990 buick lesabre

Visit http://www.densoproducts.com

Rate this.

Posted on Sep 02, 2009

  • 4341 Answers

SOURCE: On-line parts diagram AC/Heater

Blend doors are in the heater and A/C box, typically not a job for non professional, very very delicate

Posted on Sep 07, 2009

ZJLimited
  • 17970 Answers

SOURCE: I need a diagram to replace the serpentine belt on

2001 BUICK LESABRE - V6 3.8L 231ci GAS FI N K

Belt Routing Diagram - Multiple Accesory
bfe315e.jpg

From DAYCO Catalogue

Hope help with this (remember rated this) Good luck.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the in take vacuum line above brake booster on a 2002 Buick lesabre ho


What size engine do you have?
How big (in diameter) is this line?
Does this line have a connector with a green cap on it?

Jul 29, 2014 | 2002 Buick LeSabre

1 Answer

Cruise control will not engage 2001 chevy express van


check for a bad fuse, replace if bad. If that is not the cause, look for a loose or cracked vacuum line.

Nov 06, 2013 | 2000 Buick LeSabre

1 Answer

My 2001 buick lesabre is pulling a random misfire code and spits and sputters and smells like the car is floading


find the fuel pressure regulator. you should see it mounted on the return line of the fuel rail under the plastic engine cover. it will have a small vacuum hose attached to it. Remove the hose and see if gas comes out of the regulator. If it does replace it immediately.

Apr 08, 2013 | 2001 Buick LeSabre

1 Answer

01 BUICK LESABRE IDLES HIGH THEN IDLES LOW WHEN STARTED


its probably a vacuum leek check pvc line oil eats the rubber line and it cracks

Jan 14, 2013 | 2001 Buick LeSabre

1 Answer

No air coming out of mid vents


It's most likely a vacuum line, look under your hood (close to the cowl panel) for a disconnected, cracked or broken vacuum line.

In some rear cases, it could be the vacuum switch (in dash). Or vacuum diaphragm (under dash).

Hope this helps you ???

Jul 13, 2011 | 1997 Buick LeSabre

1 Answer

Why does my a/c get cold then get hot97 buick lesabre limited


PROBLEM COULD BE FAULTY BLOWER MOTOR RELAY OR SWITCH.COMPRESSOR CLUTCH COIL BAD OR LOOSE CONNECTION.INSPECT AIRDOOR AND DASHBOARD VACUUM LINES TO CONTROL SWITCH.MAKE SURE THEY ARE IN TACT AND GETTING VACUUM.YOUR EVAPORATER CLOGGED WITH ICE DUE TO A LOT OF MOISTURE IN SYSTEM.YOUR REFRIGERANT LEVEL COULD BE LOW NEED CHARGING.

May 16, 2010 | 1997 Buick LeSabre

1 Answer

Gears wont change


Check under the hood near the firewall towards the center of the intake manifold. There is a vacuum line that feeds a valve on the tranny called a modulator valve. This tells the transmissiion to shift out of first gear based upon the amount of vacuum it recieves. It is highly likely that the line was removed or broken while attempting to acess the distributor cap. Thank you.Dana P.S. This vacuum line is usually connected to a solid tubing going down towards the tranny.

Jan 30, 2010 | 1997 Buick LeSabre

1 Answer

On-line parts diagram AC/Heater


Blend doors are in the heater and A/C box, typically not a job for non professional, very very delicate

Sep 01, 2009 | 2001 Buick LeSabre

1 Answer

I have a 2001 Grand Prix that does the same thing. the problem


A hole on EGR pipe? If you're sure then there must be significant drop on the vacuum line. The engine must shaking while idling. This may cause by improper type of hose is used on the EGR line.

Jun 04, 2009 | 2001 Buick LeSabre

Not finding what you are looking for?
2001 Buick LeSabre Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...