Question about Cars & Trucks
The mixer will start then dies starts agian then runs for a minate then dies
Check for fuel blockage to the carby. Check for dirt in the carby blocking the main jet.
Posted on Jul 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The ck engine light should not be ignored, what sensor was shown to be bad ? Have it scanned again and replace the sensor that is bad if it still runs rough you might want to consider a tune up. Plugs, wires, fuel and air filter's and clean the throttle body with some gumout. It could also be the IAC motor Idle Air Control. Good Luck
Posted on Jun 23, 2009
While it is acting up check for spark at the spark plugs.You want to do this after it dies and will not start.If spark is good then check fuel pressure.The fuel pressure should be 48-55 psi with the key on and engine off.Let me know what you find Good luck.
Posted on Mar 25, 2010
SOURCE: car runs fine just quits
Does this have a "Check Engine" or "Service Engine Soon" light on? If so, get the codes pulled and post them back here along with the engine info. If no codes are present then it may well be a bad crankshaft sensor. I have seen many of these give intermittent problems (usually heat related) and do exactly what you have described without setting a code.
Posted on May 24, 2010
Tips for a great answer:
Dec 21, 2015 | Cars & Trucks
Feb 28, 2014 | Cars & Trucks
Dec 11, 2013 | Cars & Trucks
Jun 30, 2012 | Honda Civic Coupe
Sep 29, 2010 | 1994 Honda Accord
Oct 15, 2009 | 1994 Chevrolet K1500
Sep 21, 2009 | 1994 Honda Accord
Jun 11, 2009 | 1994 Honda Accord
26 people viewed this question
Usually answered in minutes!