Question about Cars & Trucks

Open Question

How to fixp0333 on a 2006 audi a4

Check engine light on code p0333

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 345 Answers

SOURCE: audi a4 front lights

if you mean the complete light you will have to remove front bumper then you will get to the bottom bolts that hold the headlamp in.....

Posted on Oct 25, 2008

Ad
  • 102 Answers

SOURCE: engine number location for 2002 audi a4

is it a 1.8 turbo or 2.8 V6 or 2.7 biturbo V6 ? on most models what you will be looking for is a 3 letter code like ATQ or APW and is normally on a sticker on the timing belt cover, it is also stamped into the engine on a ledge up high. if no luck there check the owners manual, around the 3rd page there will be a sticker that was put in the book during predelivery inspection this sticker is about 3 inches by 3 inches and filled with id codes for almost everything. If the pdi wasn't done right another copy of the same sticker will be under or next to the spare tire in the spare tire well.

Posted on Mar 24, 2009

  • 1 Answer

SOURCE: Audi A4 need to replace rear brake light on audi a4

Inside the boot is a plastic cap embeded in the boot liner. Remove the cap to reveal a screw. Undo the screw and the whole rear light cluster will come away in a sideways and not rearward direction to reveal all of the bulbs. Hope this helps.

Posted on Jul 11, 2009

  • 1986 Answers

SOURCE: 2005 Audi A4 1.8T check engine light just came on

You'll need to have your check engine light scanned to get that code(s) to pinpoint the issue. Anything could cause that light to come on... Bad EGR, bad TPS, bad igntion system, etc

Posted on Sep 11, 2009

  • 1 Answer

SOURCE: Audi A4 engine sputters/no power

Hi i know exactly what is wrong I had the same problem with my A6 change the air mass flow meter or sensor min was wher the air filter is sat writ on the top n£45 from eby good lich.

Mo

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audi a4 1,8 s line


The computr needs a flash or reprograming w a factory scanner. It common not to recognize new motor. First make sure pins are clean on computr plug

Feb 06, 2016 | 2002 Audi A4

1 Answer

Does anyone know how to turn off the service light on Audi A4 2011 diesel engine


run fault codes to check if a fault is recorded then use a code reader to reset the CPU.

Mar 05, 2014 | 2009 Audi A4

1 Answer

463a engine control unit disabled Audi a4 1.9 td


463A definitely not VAG codes they are from one of the cheap code readers.
Audi A4 Quattro - fault code 463a: engine control unit disabled.
This could be a dirty sensor or bad connection somewhere.
The immobilizer light flashes when you insert the key?
Imobiliser pick up loop in the steering column sounds dodgy, take the cowling off & check its connected ok. Just clipped it back in.

Jul 22, 2010 | 2002 Audi A4

1 Answer

Service light on audi a4


If the check engine light is on, then I suggest taking the car to an autoparts store and have them scan the computer for codes stored. Most parts stores will do the scan for free. The check engine light comes on to alert you that the computer has noted a fault in one of the car's systems and getting the codes will show what the computer identified so that appropriate corrective action can be taken. Hope this helped and best wishes.

Oct 05, 2009 | 2004 Audi A4

1 Answer

Flashing check engine light on 2003 audi A4


you should stop driven the vehicle and get it repaired, The engine light flashing mean the emission problem is doing damage to your convertors.

Sep 25, 2009 | 2003 Audi A4 Cabriolet

3 Answers

2003 Audi A4 1.8T Check Engine light on


The CEL means there is a Diagnostic Fault Code stored in the Engine Control Unit. There are 1000's of DTC's, so you will need to have it read by a Code Reader. Auto Parts stores like Auto Zone, Pep Boys, perhaps even Advanced Auto often will read the code for you; but by law they cannot clear the codes. Many codes do not cause drivability problems, severe ones will trigger the ECU to run in a Limp Mode, which would require repair work before any trip longer than a few miles. Hope this is helpful.

May 31, 2009 | 2003 Audi A4 Cabriolet

2 Answers

2004 Audi A4 ck engine keeps coming on car seems to be doing ok


do you have any special modifications done to the car. Air Filter anything.

Jan 10, 2009 | 2001 Audi A4

2 Answers

2005 Audi 1.8 a4 check engine light on and car now spudders??


FYI also when you get those codes you can look them up and get their description at http://www.check-engine-light.com

Jan 03, 2009 | 2005 Audi A4

1 Answer

Check engine light


Nope, no check light is triggered by high RPM, unless you overrev and damage something. Go to AutoZone and have them do a code scan (a dealer will charge an hour's labor, but at AutoZone it's free). Post the codes as a reply here and we'll go from there.

Aug 04, 2008 | 2005 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15483 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...