Question about Subaru Cars & Trucks

Open Question

Subaru headlight washer cover - Subaru Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the headlight switch on a subaru


The headlight switch is part of a muti-switch the runs the lights on one side and wipers on the other. They are not cheep.
1) remove air bag
2) remove steering wheel
3) remove steering colum covers
4) unplug multi- switch (there may be 2 screws that hold the plug to the colum
5) remove screws (I think there is 4 screws) that hold multi-switch
6) remove muti-switch. (there may be a ty-wrap or wire harness holder you will need to free the wires from)
7) reverse order to reinstall

Jul 09, 2014 | 2008 Subaru B9 Tribeca

1 Answer

Cleaning foggy, oxidized headlight covers on my 2000 Subaru Outback with household items?nck AWD, 4 cylinder wagon...with?


Rubbing compound will buff off the oxidation that effects (clouds) the outside surface of plastics. Some waxes have a little abrasive that will help do this. Toothpaste will also work mixed with wax. Use some muscle and buff til it is dry to restore the plastic gloss. Shops use an electric or pneumatic buffer with a wool or foam pad and extra fine rubbing compound.

Apr 12, 2013 | 2000 Subaru Outback

1 Answer

Back of headlight cover


http://www.autopartswarehouse.com/models/subaru~outback~makemodel.html

Dec 07, 2012 | 2006 Subaru Outback

1 Answer

Removing low beam bulb on 05 subaruoutback


Whether they become damaged in an accident or simply burn out over time, your Subaru Outback's headlights may eventually need to be replaced. Fortunately, once you've purchased the right replacement bulb for your model year, performing the repair yourself is relatively easy. These instructions only apply to Outback models made after 2000.

  1. Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment (driver's side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Turn the bulb cover counterclockwise and remove it from the assembly.

  4. 4

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  5. 5

    Pull the old bulb directly out of the socket and replace it with the new one. Press the retaining spring back into place and reattach the electrical connector.

  6. 6

    Replace the bulb cover, and then turn on the engine. Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

    Replacing the High-Beam Bulbs
  1. 1

    Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment ( drivers side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  4. 4

    Turn the headlight bulb counterclockwise and pull it out of the socket.

  5. 5

    Reinstall the new bulb, replace the retaining spring and reconnect the electrical connector.

  6. 6

    Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

Sep 14, 2012 | Cars & Trucks

1 Answer

Headlight washer cover bmw


there is clips on top and under the light cover next to the bumber. just telease those and you should be able to pup the cover out.

Oct 31, 2011 | 2003 BMW 330

1 Answer

How do I get the plastic cover off the headlights? 1997 Subaru Legacy Wagon


From the under the hood. There are some bolts there. Just did it 2 weeks ago.

Dec 16, 2009 | 1997 Subaru Legacy

1 Answer

Need to replace a headlight assembly for a 2006 Subaru Outback.


No, you just remove the radiator grill and the side marker light and the headlight housing bolts and it comes out. Not a real hard job and is Real straight forward. Good luck and have a good day.

Mar 27, 2009 | 2006 Subaru Outback

2 Answers

Replacing headlights 2003 Subaru Legacy


If your just trying to replace the bulbs you'll have to twist the grey cover on the back side of the head lamp lens assembly either clockwise or counter. they are usually very hard to turn because they have a water tight sealing O-ring that your turning against. But, it is much easier to turn the drivers' side if you remove the battery, I recommend it. Once you have the covers off you will see the back of the bulb being held in by a little wire hold-down, you can unhinge it just like a safety pin(push it in,down,& let it spring it's self out and away from the bulb). Then just pull on the white wire to free the bulb, DO NOT TOUCH the new bulb glass with your fingers cuz the oils will cause the bulb to explode once the bulb is turned on. Then just install in reverse order in which you removed it all. Sometimes the simplest actions take the most complex explinations, don't they? Hope this is what you were asking about, & I hope it helps...

Feb 21, 2009 | 2003 Subaru Baja

2 Answers

How do I remove headlight cover in Subaru 1998 brighton wagon?


THE HEADLIGHTS ARE A SEALED ASSEMBLY. YOU WILL NEED TO REMOVE THE COMPLETE HEADLAMP TO ACCESS THE BULBS.

Dec 18, 2008 | 1998 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...