Question about Cars & Trucks

Open Question

Power loss in gwm 2.8 steed diesel 2008 model

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: i have a gwm steed 2.8 tdi. my power dissapears

hi this is a turbo problem, i have the same issue if you remove the air filter pipe from the turbo and check the play on the axle you'll notice that it is way loose

Posted on Feb 04, 2011

emissionwiz
  • 75822 Answers

SOURCE: GWM Power Steering problem

It sounds like the steering rack is leaking pressure internally.

Posted on Sep 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GWM steed 2.5 diesel crank sensor position


There are a lot of year models if you gave the year make model it wil help and the problem would help to get what you need good luck

Nov 06, 2016 | Cars & Trucks

1 Answer

Gwm Steed 2.5D Cleaned crank sensor now it does not want to start what could be the problem.


How did you clean it? If submerged in parts washer, replace unit. I have no idea what a Gwm Steed might be, but why did you clean this part?

Jul 25, 2016 | Cars & Trucks

1 Answer

GWM Steed 2.8td not starting


Hi , this may sound funny but i found on other pickups that would not start the battery was ok the alt was ok it ended up the coolant sensor was duff replaced it and the car started ok.

Dec 18, 2015 | Cars & Trucks

1 Answer

GWM Steed 2008 2.8 diesel turbo. The common fuel rail started leaking. It was fixed. When idle it did not leak but when refs up it started leaking again. Think could be due to too much pressure.


It should not over pressurize as there is a pressure relief valve on the pump I would take it back to the mechanic who repaired the vehicle and ensure when the common rail was replaced that all high pressure lines where also replaced

Oct 28, 2015 | Cars & Trucks

2 Answers

Gwm steed repair manual


gap should be 0.8mm

Jan 14, 2014 | Cars & Trucks

2 Answers

2008 gwm steed 2.8 TC D/C Diesel


white smoke means antifreeze is being burned in combustion chamber-you have a bad head gasket-when you replace it have the head planned or it may happen again -cheers Denny

Nov 17, 2013 | Cars & Trucks

1 Answer

I need the timing marks on the fly wheel on a 2.8d gwm steed


I want to do timing on my gwm steed after replasing my diesel pump

Aug 07, 2013 | Cars & Trucks

1 Answer

GWM Power Steering problem


It sounds like the steering rack is leaking pressure internally.

Sep 11, 2012 | Cars & Trucks

2 Answers

I have a gwm steed 2.8 tdi. my power dissapears once the vehicle is at running temp. i dont believe it is dirty diesel or a service issue. this has been checked. does anyone have an idea what it could be.


hi this is a turbo problem, i have the same issue if you remove the air filter pipe from the turbo and check the play on the axle you'll notice that it is way loose

Aug 23, 2010 | 2006 Isuzu i-280

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...