Question about Cars & Trucks

1 Answer

2000mitsubishi monterior sport 6 cylinder where is egr valve located

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Coolant reservoir slowly going down! freeze plugs-( no leaks)-( no) coolant leaks outside of engine, no white smoke, changed oil today and no coolant! coolant reservoir sits on tire wall.

Posted on Jul 17, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: egr valve

it is not on the drivers side. it is on the passengers side back by the fire wall

Posted on Nov 11, 2008

  • 1 Answer

SOURCE: Replacing egr valve 2000 Cougar 6 cylinder

First the sleeve is put on the pipe and then the pipe is flared with a flaring tool. The single flare is required to seat and seal on the egr valve if the sleeve is damaged or the threads are messed up then you would have to cut the flare away to remove the sleeve then get the replacement sleeve install the sleeve and reflare the tube as lond as you dont cut off more than the flare itself about 1/8 of an inch you should be good to hook it back to the egr valve. Hope this helps I just changed my Pressure sensor and egr valve and am still getting P1401, but have a feeling its due to carbon build up in the vac lines.

Posted on Jun 06, 2009

SOURCE: where is the EGR valve lift sensor located on my

it is on any one fuel injector who having a wire on it or it will look differant from others. thanks.

Posted on Jan 16, 2010

  • 33 Answers

SOURCE: 1996 buick century, I had a tune up and egr valve

Have an auto parts store check for the code. It is possible that you have a bad O2 sensor or your catalytic converter is clogged.

Posted on Apr 10, 2010

  • 1915 Answers

SOURCE: Have a 2002 Mitsubishi Montero

check owners manual for fuse for emissions devices

Posted on Dec 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the egr on a trail blazer 2002 4.2 l


I can't find any listing showing that this 4.2 6 cylinder engine uses an EGR valve, and I have read chevy owners saying the same thing about this engine. It does have a block off plate, but no valve mounted. If had one it would be bolted to the top passenger side of the engine

Jul 19, 2016 | 2002 Chevrolet TrailBlazer

1 Answer

Wher egr value located


Here's a link to a picture of what the EGR look's like,it's at the back of the engine,easy to remove.When bad, vehicles can experience poor engine performance, poor idle, high NOx emissions, failed emissions test, hesitation, engine surging http://www.autozone.com/emission-control-and-exhaust/egr-valve/duralast-egr-valve/volvo/960/1995/6-cylinders-9-2-9l-efi-dohc/857098_162245_0

Sep 27, 2015 | 1995 Volvo 960

1 Answer

Where is egr valve located on 1983 chev s10 blazer


4 cylinder model the EGR valve is located between 2 & 3 cylinder on intake manifold and between Carb and valve cover it has a diaphragm cover about 3 inches round and one vacuum hose 2 bolts holds it to the intake. V-6 models EGR valve is located on drivers side of engine just behind carb and about the same size and roundness and one hose two bolts.

Nov 04, 2013 | Ford Expedition Cars & Trucks

1 Answer

Where is the EGR valve located on a 1995 Jimmy with 6 cylinder vortec?


it is under intake hose its a round cyl about 2.5 to 3in round two bolts 10 mmm 1 electric plug look up one on ebay so you know what it looks like good luck

Sep 01, 2012 | 1995 GMC Jimmy

1 Answer

Auto part store says there is no egr valve on 08 dodge ram 1500 4.7. True?


25 - Emissions Control/Exhaust Gas Recirculation, Gas/VALVE, Exhaust Gas Recirculation (EGR), 4.7L/Removal REMOVAL collapse.gif Labor Operations: Click to display a list of Labor Operations associated with this procedure

2431021.jpg The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head. An exhaust gas routing tube connects the EGR valve to the intake manifold.
1. Use a diagnostic scan tool to record any Diagnostic Trouble Codes (DTC). 2. Remove the throttle body resonator. 3. Perform the fuel system pressure release procedure (Refer to 14 - Fuel System/Fuel Delivery - Standard Procedure) 4. Disconnect and isolate the negative battery cable.


2430847.jpg 5. Disconnect the power brake booster vacuum hose (1) and the vapor canister purge hose (2) at the intake manifold.


2430720.jpg 6. Disconnect the EGR valve solenoid electrical connector (1).


2430801.jpg 7. Remove the EGR valve assembly retaining bolts (1). 8. Remove the EGR valve and the EGR routing tube from the engine as an assembly. 9. Remove and discard the metal gasket located between the cylinder head and the EGR valve assembly.


2433378.jpg 10. Remove the EGR valve routing tube retaining bolts (1) at the EGR valve assembly 11. Remove the EGR valve routing tube and discard the gasket.

Feb 14, 2012 | 2008 Dodge Ram 1500 2WD

1 Answer

Where is the egr valve on a 2005 dodge 1500 5.7L


The electronic EGR valve and solenoid assembly (3) is attached to the front of the right cylinder head (1). An exhaust gas routing tube connects the EGR valve to the intake manifold.

2efe0f8.gif

Disconnect electrical connector (1) from EGR solenoid (2). Remove two bolts (3) connecting EGR tube (4) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly.

Remove two mounting bolts (2). Separate valve assembly (3) from cylinder head (1). Remove and discard metal gasket located between cylinder head and valve assembly.
The new EGR valve will come with a new metal gasket. You can reuse the smaller gasket for the metal pipe going to the egr valve as long as its not damaged.

TY for using Fixya; remember rated this post.

Apr 14, 2010 | 2005 Dodge Ram 1500

2 Answers

2005 Dodge 1500 code p0404 EGR valve.


The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

1 Answer

EGR valve mystery problem


you have carbon built up in there.its going to be hard to get it out it can be done.if u can take egr valve out spray some carb cleaner in there. and then try blowing it out with a air gun.watch your eyes as chuncks of carbon will fly out.do it a couple of times and then reassamble.

Nov 12, 2008 | 2002 Ford Explorer Sport

2 Answers

Egr valve


It's under the hood, driver side, upper engine area attached on the end of the cylinder head

Oct 29, 2008 | 2000 Honda Passport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...