Question about 2005 Lincoln Town Car
I drove the car one afternoon and went to start it the next day and it did nothing. I thought the battery was dead. Checked and the battery is ok. checked fuse box and they appear ok. The seat does not move, lights won't come on, no alarms work like door ajar, and the car will not start.
Take keys out of car with you and lock all doors, then unlock door with the key and retry cranking vehicle
Posted on Nov 04, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
did it quit making the noise when you lightly push down on the trunk? most people slam these trunks and your not suppose to you are only to put light pressure on them and they pull it closed theirself.. you might check your relays under the hood and look in the box lid to see which one it is.. if this is not the problem you might have to replace the motor to the latch .. you might check with a test light to see if there is power to the motor first though .. thanks and holler if you have more Jerry .
Posted on Apr 26, 2009
SOURCE: door ajar light won't go off
I had the same problem. Spray WD-40 (with the sprayer extender) into the latch of the doors very liberally. Open and close doors a few times. Should resolve issue.
Posted on Jun 01, 2009
Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.
Posted on Jul 03, 2009
Before going ahead and spending money on a new module, test it first. The module is located under the steering column. You'll find a Brown wire on one of the connectors (i just looked at a wire diagram). Do no disconnect anything. Back probe the brown wire, which is the power feed to your park lights. With the lights off, there should be 0 volts on you voltmeter. Turn the park lamps on, There should be 12V. If there is not 12V, disconnect the connector and try to check voltage at the pin that feeds to the brown wire, if still not 12V, replace the module. If you do get 12V, then module is ok, find where the 12v is being dropped before making it to the lamps.
Posted on Aug 09, 2009
Tips for a great answer:
Sep 07, 2014 | Hyundai Motor 2004 Sonata
Dec 13, 2013 | Jeep Cars & Trucks
Jun 15, 2017 | 2003 Mitsubishi Galant
Jun 23, 2012 | 2004 Pontiac Grand Prix
Nov 03, 2011 | 2008 Suzuki Forenza
Oct 28, 2017 | 1996 Volkswagen Passat
Dec 14, 2008 | 1996 Volkswagen Jetta
Jul 25, 2014 | 2005 Lincoln Town Car
174 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: