Question about Cars & Trucks

Open Question

P32lcd12 polaroid tv

NO POWER AT ALL

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Netflix works up until I press OK, then screen goes black. Thankyou.


Restart the smart TV
Press and hold the power button on the TV remote control for 10 seconds to restart the TV.
If you restart the TV, try Netflix again.
If the TV does not restart, turn it on again and continue with the following troubleshooting steps.
Disconnect the TV from the power for at least 1 minute.
With the TV off, press and hold the power button on the TV for 5 seconds to unload it.
If you can not access the power button or your TV does not have it, leave the TV off for at least 3 minutes.
Reconnect the TV.
Turn on the tv.
Try Netflix again.

Aug 12, 2017 | Cars & Trucks

1 Answer

No picture, just sound on Etec Flat Panel 40A99


Video circuit is separate from the Audio circuit. The main controller may switch to Audio, but if the unit is damaged from a power outage; part of the circuit board may not function. Needs professional servicing.

Feb 26, 2014 | Cars & Trucks

1 Answer

Does not power up


I have a sharp tv that stopped coming on,the problem ended up being a swollen capacitor. bought a kit off ebay and replaced all the caps on the power board tv works great.

Nov 26, 2013 | Cars & Trucks

1 Answer

APPS FOR MY POLAROID TABLET


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..

Aug 30, 2012 | Cars & Trucks

1 Answer

I don't know how to fit a gme psk08 power supply and power injector from the wall socket to the tv. Everything works out except the plug in to the amplifier


You can easily get the support connection pin socket to match the RF input to the TV as it will be best to get the ampifier to the nearest spares store so as to find the mating pin.

Dec 30, 2011 | Cars & Trucks

1 Answer

Polaroid LCD tv DVD combo no power problem is it capacitors ?


Hi Tom, The switch mode supplies in these TV's are an issue. The high frequency transformers do give trouble as do the opto isolators. I would be checking the electro's first with a capacitance meter, they can fail but not bulge the tops!! Check ALL the solder joints that you can with a magnifying glass if you can get one. If nothing shows up there, all you can do is go through each component one at a time and check it's value. The controller chip, transformer and opto are difficult to check so if all else fails, suspect them. The transformer can be checked with a shorted turns tester if available. Also, remove the transformer from the board and carefully check each winding at the pins as they also have a tendency to break the winding at the pin due to thermal stress.. Have fun..

Nov 30, 2009 | Cars & Trucks

1 Answer

WHAT IS WRONG WITH MY PHILLIPIS T.V.?


You are not the only one I can tell you that. I had a similar problem with my Phillips 42 in. LCD HD TV.

Here's the problem. The Power Supply Board. I opened my TV up(warranty was up of course) and found several bad capacitors. Phillips and several other companies were sold capacitors that although were highly rated failed within 5 years because of a lack of preservatives. All sorts of electronic equipment is now being effected due to these defective capacitors.
Solutions?
1. Take it in and have it fixed
2. Open it up, check the board for faulty capacitors(bulged or leaking) Buy a new Power supply board and install it.
3. Remove PSB, remove faulty capacitors and replace with compatible new ones.

Hope this helps

Sep 02, 2009 | 1997 Geo Prizm

1 Answer

Turn the tv on, 1-2sec's l8r it turns off


sounds like the TV has a damaged power supply, most like caused by a bad capacitor on the power board, the capacitor exploded and leaked all the gases which stores electricity, so the power board isn't getting enough flow of electricity for the tv to stay on, very easy fix if you know what to do and have good soldering skills.

May 10, 2009 | 2003 Mitsubishi Outlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...