Question about Toyota Camry
98 Camry timing belt. Need a installation procedure / Help- video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: timing on 1999 toyota camry 2.2
there are 2 points on the crank and on the drive shaft that have to be lined up and then you put the belt on with the lined up point to point.the belt does not have to be marked
Posted on Aug 09, 2008
SOURCE: need marks for timimg belt
On the crankshaft gear there is a VERY small dimple that aligns with a mark on the motor. The mark on the motor (a small triangle) is at roughly 11 o'clock. After you line these timing marks up look at the camshaft gear and you will see that on one of the spokes there is a hole. You need to use a mirror to line this hole up with the dimple on the cover that is behind the camshaft gear. (It is at roughly 1 o'clock) If this hole is 180 degrees from where it should be you need to rotate the motor 1 more revolution at the crankshaft and it should now be lined up, or close. Once lined up I like to take a silver (metallic) Sharpie and make my own mark on the camshaft gear and on the backing plate that is behind it. You can make this mark where ever it is convenient for you. As long as you know where your marks line up, that is all that matters. This way I don't have to use the mirror as often.
Posted on May 26, 2009
Both the 4 and 6 cyl. engines in this car have belts. The 4's don't last as long because they lack a tensioner and get noisy. Toyotas for the most part do not get hurt when the belt breaks. non interference engines...nice huh?
Posted on Jul 10, 2009
Just make sure the timing belt is on properlyy, lining up the cam and crank in proper position to each other. The engine willstart when fully assembled because the electrical has not be altered. If it has a crank position sensor , be sure to put it back on after cleaning it and the connector.
Posted on Nov 14, 2009
Tips for a great answer:
Apr 29, 2014 | 2008 Toyota Camry LE V6
Feb 08, 2011 | 1999 Toyota Camry
Jan 06, 2011 | 1998 Toyota Camry
Dec 23, 2010 | 1993 Toyota Camry V6
Jun 29, 2010 | 1995 Toyota Camry
Feb 27, 2010 | 1997 Toyota Camry
Jan 07, 2010 | 1998 Toyota Camry
Aug 30, 2009 | 1998 Toyota Camry
Apr 27, 2009 | 1998 Toyota Camry
Feb 25, 2009 | 1993 Toyota Camry V6
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: