Question about Cars & Trucks

Open Question

Wat torque is da rod bolts on vw caddy 16i 8v bsf

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75807 Answers

SOURCE: 2005 Tucson

camshaft sprocket bolt 58-72 ft. lbs. crankshaft pulley bolts 108-132 ft. lbs. crankshaft pulley center bolt 80-94 ft. lbs. cylinder head bolts cold engine 65-72 ft. lbs. warm engine 73-80 ft. lbs. cylinder head rear cover bolts 69-86 in. lbs. flywheel/Driveplate bolts 94-101 ft. lbs. intake/Exhaust manifold nuts/Bolts 11-14 ft. lbs. jet valves 13-16 ft. lbs. main bearing cap bolts 36-39 ft. lbs. oil pan bolts 51-69 in. lbs. oil pan nuts 43-60 in. lbs. oil pan drain plug 33 ft. lbs. oil pump cover bolts 72-84 in. lbs. oil pump relief valve plug 29-36 ft. lbs. oil pump sprocket nut 25-28 ft. lbs. Rear oil seal retainer bolts 84-108 in. lbs. rocker arm shaft bolts 14-15 ft. lbs. rod bearing cap nuts 23-25 ft. lbs. silent shaft sprocket nut 22-28 ft. lbs. spark plugs 15-21 ft. lbs. thermostat housing-to-Engine bolts 86-114 in. lbs. timing belt tensioner bolt 32-40 ft. lbs. valve cover bolts 43-61 in. lbs. water pump-to-Engine bolts alternator brace bolt 14-20 ft. lbs. all others 9-11 ft. lbs. water pump pulley bolts 72-84 in. lbs.

Posted on Sep 08, 2008

  • 1 Answer

SOURCE: torque specs

i need head torque specs

Posted on Feb 06, 2009

alicantecoli
  • 22133 Answers

SOURCE: what is 1996 1.6 8v cylinder head bolt torque settings

80 lbs

Posted on May 07, 2009

terseo
  • 92 Answers

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Posted on Sep 20, 2009

steve_e_uk
  • 1675 Answers

SOURCE: golf iv 1.6 8v cylinder head torque settings

hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins 2nd stage 60nm leave 5 mins 3rd stage 90 degrees leave 10 mins 4th stage 90 degrees then you are done i will try put order on here i hope this works as follows
10 4 2 6 8 front of engine back of engine 7 5 1 3 9

in that order hope this helps

Posted on May 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Anybody know the torque setting for the head bolts on a 2001 vw beetle 1.6 8v with the engine code ayd


Sorry I don't know but if I were doing that kind of work, I would order a shop manual on line.

May 21, 2015 | 2001 Volkswagen Beetle

1 Answer

Hello guys! I have a problem with my caddy 2006 1.6i (bsf) front wipers won't work. I checked all fuses and they work fine. The sprayer nozzles work though. There's no power coming to the wiper motor.


IF HOOD INDICATION IS OK AND HOOD CLOSED AND STILL NOT WORKING TRY RESETING THE MOTOR BY TAKING OUT THE CONNECTOR AND LEAVE IT OUT FOR AT LEAST 5 MIN.TRY WORKING IT AGAIN.IF NOT WORKING REPLACE THE MOTOR.

Mar 28, 2015 | 2006 Volkswagen Caddy 1.6

1 Answer

What is the torque setting for a vw fox 1600 1991 model for the head and pistons


The cylinder head is 30nm first then 60nm second then 180' (this is done in 2 90' movements) New bolts are required. New big end bolts are required for the con rods, when you buy them just ask the agent to look up the torque for you, they will have this available to them.

May 22, 2014 | 1993 Volkswagen Fox

1 Answer

Vw 1.8 engine torque setting


The cylinder bolts,pretighten all bolts to 30ftlbs and the used an angle
torque wrench and torque to 90degrees and then to 90degrees again
the main bearings torque to 48 ftlbs and an additional 90 degrees,the rod bearings are tighten to 22ftlbs and an additional 90 degrees.

Nov 29, 2012 | Cars & Trucks

2 Answers

Golf iv 1.6 8v cylinder head torque settings


hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins 2nd stage 60nm leave 5 mins 3rd stage 90 degrees leave 10 mins 4th stage 90 degrees then you are done i will try put order on here i hope this works as follows
10 4 2 6 8 front of engine back of engine 7 5 1 3 9

in that order hope this helps

May 10, 2010 | 1986 Volkswagen Golf

1 Answer

Replacing engine head and need to know the torque on a 2002 vw jetta head bolts


if its a diesel 8v or a petrol then its 40 nm, 60 nm, 90 degree, 90 degree

May 07, 2010 | 2002 Volkswagen Jetta TDI

2 Answers

I need the torque setting for refitting a cylinder head on a mk2 golf 8v gti


1990 VW Golf 1.8L 8 or 16 valves.
step # 1 29 ft/lbs
step # 2 44 ft/lbs
step # 3 turn bolts 180deg. further in one continuous movement, two separate 90deg. turns may be used.

Dec 26, 2009 | 1990 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...