Question about Mazda Cars & Trucks
Torque settings on a mazda rustler 1300lt 2001 model on the wheelbearings
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: wheelbearing replacement
Welcome to FixYa
the front wheel bearing is a hub unit.
need to remove the tire,brake caliper, rotor, the 34mm nut in the axle, then there is 3 bolts that hold the hub to the spindle, those come off then the hub comes out,reverse to install.
Posted on Jan 12, 2009
this is not really a DIY job,you will need some special tools to remove the bearing and refit the new one.If you know enough to remove the hub assembly then i will explain how to remove the bearing and fit the new one,failing which remove the hub assembly and take it to a local engineers/re-conditioners to have the bearing pressed in and out
Posted on Feb 28, 2009
air tools nice- need to pull wheel, remove caliper out of way' pull rotor, remove large axle nut three torques bolts remove hub need to prees axle in block of wood large hammer works don't damage threads may want to have old nut partial install
Posted on Aug 30, 2009
Sounds like a bad vacuum line to the IWE ( Integrated Wheel End ) or a problem with the IWE solenoid.
Operationally vacuum holds the IWE ( Integrated Wheel Ends ) out, and once vac is removed the spring engages the IWE.
Start by checking the vacuum line at the IWE for vacuum when the truck is in 2WD mode, and the engine is running. If you have low vacuum on one side, trace the vacuum lines back towards the IWE solenoid.
This is a block diagram of the IWE vacuum lines
Posted on Sep 04, 2010
SOURCE: is there wheelbearings in the
go to autozone website and register your vehicle. look under do it yourself intermediate and look at the suspension...rear. probably has a hub assembly that has to be changed. i was just on site looking at one for an 04 grand prix. hope it helps you.
Posted on Nov 28, 2010
Tips for a great answer:
Oct 17, 2014 | 1996 Nissan Pathfinder
Dec 02, 2012 | Cadillac Escalade Cars & Trucks
Jan 16, 2011 | 1998 Jaguar XJ8L
Jan 13, 2011 | 2004 Saturn ION
Sep 27, 2009 | 1998 Dodge Neon
Aug 29, 2009 | Daewoo Lanos Cars & Trucks
Nov 19, 2008 | 2000 GMC New Sierra 1500
77 people viewed this question
Usually answered in minutes!