Question about Honda Cars & Trucks
Size of rear passenger side brake line 1997 Honda odyssey
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Bad PROPORTION VALVE ... the back brakes should only be doing 30% of the stopping with a bad proportion valve it will send more pressure to the back during braking and cause it to lock up. Good Luck and thanks for using FIX YA
Posted on Jan 04, 2009
SOURCE: 2002 Honda Odyssey
The tracks may be clean but the rollers can get damaged. I found one door with a roller entirely missing. There are several rollers on each of three brackets; top, middle, and lower. For example, the middle bracket has two rollers which rotate axially in the horizontal direction to track the side of the rail---and a vertical roller to carry the weight of the door on the bottom of the track. If any of these rollers becomes chipped, cracked or simply are missing, you will get grinding noises and bucking problems. Use a strong flashlight and check ALL of the rollers for damage.
Posted on Jan 21, 2009
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Posted on Jan 24, 2009
the rear side window vent motor is bad, u need to replaced it...common on these vans...i hope its the left rear and not the right....right is a little more difficult re installing due to the rear a/c ducts
Posted on Apr 13, 2009
Tips for a great answer:
Mar 19, 2016 | Honda Cars & Trucks
May 24, 2015 | 1997 Honda Odyssey
Oct 11, 2011 | 2005 Honda Odyssey
Feb 17, 2011 | 1997 Chevrolet Blazer
May 31, 2010 | 2000 Honda Odyssey
Mar 12, 2010 | 2007 Honda Odyssey
Apr 07, 2009 | 2003 Honda Odyssey
Mar 30, 2009 | 2003 Honda Odyssey
Mar 24, 2009 | 2005 Honda Odyssey
19 people viewed this question
Usually answered in minutes!