Question about Cars & Trucks

Open Question

Search expansion valve removal 2003 mini cooper s

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: Replace the A/C exansion valve

i am not really sure on this but try these websites fix & troubleshoot heating & A/C its www.automedia.com and the other one is car A/c repair www.directgardening.com if you have a autozone near you there you can rent the special tools you will need take them back and get your money back try www.autozone.com

Posted on May 25, 2009

Ad
  • 60 Answers

SOURCE: horn not working on a 2003 mini cooper...

If you have removed the front bumper then there were holes in the metal bumper the size of baseballs on either side. Just to the outside of these holes and behind on the core support is where the horns are suppose to be. Your outside temp gauge should be the longest wire on the drivers side that comes through the metal and attaches to the inside of the plastic bumper.

Posted on May 28, 2009

  • 26 Answers

SOURCE: '03 Mini Cooper Xenon Replacement

If it's oem xenon than it should be 2 lamps. Because they had only xenon on the low beam (d2r type), however begin with changing the high beam. That one is inexpensive, so you could check if there are no other problems (like wiring).
Just open your hood and it should be clear how to open the cover for your high beam.

Posted on Dec 21, 2009

Testimonial: "Thanks! I am traveling but will check once I am back in town. Thanks for taking the time to reply!"

  • 67 Answers

SOURCE: 2003 mini cooper -how to remove door panel

Try this web site for detailed instructions on removing door panels. http://www.z50ak1.com/mini/default.htm

In short... remove four Torx screws (One is under the little round reflector on the door., remove the trim around the speakers, carefully pry panel off to avoid breaking the plastic retainer clips.

Posted on Sep 06, 2010

weekspena
  • 375 Answers

SOURCE: how to remove/replace heater core 2003 R50 MINI

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Posted on Jan 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I put the power steering fluid on a 2003 mini cooper?


No fluids are consumed on any vehicle

So why would you be adding, unless you have
a leak to repair

Have a repair shop educate you

Mar 28, 2013 | 2003 Mini Cooper

1 Answer

Where is the thermostat on 2002 mini locted. blocked need changing.


the thermostat is located in the cylinder head and is retained by a plastic housing (aluminum on COOPER S). the thermostat begins to open at 89-92°C and is fully open at 103°C.
the MINI COOPER thermostat housing also incorporates the cooling system pressure cap (MINI COOPER S system pressure cap is installed on the expansion tank).
need remove intake filter housing an map connectors

Mar 02, 2011 | 2002 Mini Cooper

1 Answer

How to change a 2003 mini cooper wheel bearing


Remove the wheel then remove the brake caliper and rotor, remove nut from lower balljoint split balljoint and control apart,remove the cv nut from axle then pull spindle back and slide cv shaft out of spindle,next on the rear of the spindle remove the bolts that hold bearing to spindle then use a hammer to tap bearing out of spindle here a picture to help you locate the bolts on the spindle and to see what it looks like,984d3b5.jpg

Oct 04, 2010 | 2003 Mini Cooper

1 Answer

2003 mini cooper -how to remove door panel


Try this web site for detailed instructions on removing door panels. http://www.z50ak1.com/mini/default.htm

In short... remove four Torx screws (One is under the little round reflector on the door., remove the trim around the speakers, carefully pry panel off to avoid breaking the plastic retainer clips.

Aug 18, 2010 | 2003 Mini Cooper

1 Answer

Trick to Mini Cooper 2003 rear brake calipers?


Mini cooper rear calipers pistons must be rotated as they are compressed. As you look at the face of the piston, it is rotated clockwise.

Apr 03, 2010 | 2003 Mini Cooper

1 Answer

Where do you top up the radiator water in a mini cooper (2004)?


there is an expansion tank in the middle of the firewall when you open the hood and look from front.

Jun 13, 2009 | 2004 Mini Cooper

1 Answer

Horn not working on a 2003 mini cooper...


If you have removed the front bumper then there were holes in the metal bumper the size of baseballs on either side. Just to the outside of these holes and behind on the core support is where the horns are suppose to be. Your outside temp gauge should be the longest wire on the drivers side that comes through the metal and attaches to the inside of the plastic bumper.

Apr 23, 2009 | 2003 Mini Cooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...