Question about Cars & Trucks

Open Question

Kia carens my rear seat folding strap what you pull two release backseat has broken off any idears how two fix

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Volvo V70 rear seatbelt jammed

you can remove the bolt that holds the seatbelt to the floor by pulling off the seatpad where the belt goes to the floor and then raise the seat and the belt should reset. this happens on my passenger side rear seat.

Posted on Dec 23, 2008

Ad
  • 6982 Answers

SOURCE: where is the release for the backseat to fold down

If your trunk release button is electric, and not working because you need to turn the key to give it power, remove the button and use a piece of wire to jump power to it from the battery. This will get your trunk open! (don't forget to have a spare key made)

Posted on Dec 29, 2008

  • 3 Answers

SOURCE: driver side second row seat will not fold down.

I had the same problem. The dealer wanted $400 to replace the latch. I didn't wnat to pay that much so I looked at it and found that the release strap was twisted and jammed in the mechanism. Here's how I fixed it.

I removed the screw from the lever and removed the lever. I pulled apart the plastic housing. It does not come apart all the way but enough to work on it. Pull the release strap that comes out of the back and pull it clear of the mechanism and straighten it out. slip the lever back on and the seat should fold. Fold it up all the way to make it easier to reassemble. Pull the lever back off and slip the release strap back into the slot and make sure it is not twisted or kinked. Snap the housing back together, put the lever back on, and screw it in. Test it and it should work fine. Hope this helps,

Posted on Aug 11, 2009

  • 136 Answers

SOURCE: '04 LR Freelander - rear seat belt tensioned/stuck

un bolt to remove tension, pull some of the belt out and rebolt.

Posted on Aug 14, 2009

  • 34 Answers

SOURCE: 1999 Tahoe rear seat relase quit working; can't fold down seat!

There is a cable that pulls the release when you fold down the bottom seat. Broken cable can be repaired by replacing cable.

Posted on Apr 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to let down back seat in Chevy Cavalier 2005


Pull the release straps located in the trunk. The right strap operates the passenger's side rear split seat. The left strap operates the driver's side rear split seat. Fold the seatback down from the inside of the vehicle

Feb 20, 2015 | 2005 Chevrolet Cavalier

1 Answer

Trunk access from back seat


Some vehicles have drop down rear seat, should be a button or pull strap to release. Others do not have the option, and would require removal of the lower seat and seat back by removing bolts.

Mar 24, 2014 | Ford Taurus Cars & Trucks

2 Answers

Will back seat come down


As far as I can tell, the only part that comes down is the little door in the middle of the backseat. Your key goes in there and unlocks it and you can put it up or down depending if you are hauling anything. it is available when you pull down the strap that gives you the cup holders and center console in the backseat.

Aug 14, 2012 | 1999 Pontiac Grand Prix

1 Answer

How to fold the rear seats in malibu 2011?


You should notice a looped strap of cloth next to the head rest at the top of the seat. That is the release for the seatback lock. Simultaneously pull up on the strap and pull the head rest forward to fold the seat forward. The seats are split 60/40, so each seat has its own release looped strap.

Jul 17, 2012 | 2011 Chevrolet Malibu

1 Answer

How to release rear seat when strap brokes in a 1999 chevy tahoe


Hello,

If you want to fold down the rear seat when the strap is broken there is a solution to help you out,please follow the instructions given below;

1.Take a flashlight and look down into the square recess where the two seat belt locks come up through the backseat.
2.Besides the straps you will see two pieces of metal, one in "J" shaped and inside of the "J" you will see another piece right in the middle.

3. Take a screw drive and press down on the one that's inside of the "J" while you are pulling up on the strap. The seats will lift out.

That's it,problem solved,so funny you just will have to do that each time.



Thank you for using fixya.

Mar 17, 2011 | 1999 Chevrolet Tahoe

1 Answer

How do i fold down my rear seats in my 2005 nissan sentra?


There should be a little knob inside the trunk that you have to pull. I think its on the driver's side. Once you release that knob you can lift up the backseat recline thing on the back driver's side seat and it folds down. Hope this helps.

Jun 12, 2010 | 2005 Nissan Sentra

1 Answer

Driver side second row seat will not fold down. When pulling the release catch the seat does not release . I can not fold the seat flat to carry a large load in the rear of the vehicle.


I had the same problem. The dealer wanted $400 to replace the latch. I didn't wnat to pay that much so I looked at it and found that the release strap was twisted and jammed in the mechanism. Here's how I fixed it.

I removed the screw from the lever and removed the lever. I pulled apart the plastic housing. It does not come apart all the way but enough to work on it. Pull the release strap that comes out of the back and pull it clear of the mechanism and straighten it out. slip the lever back on and the seat should fold. Fold it up all the way to make it easier to reassemble. Pull the lever back off and slip the release strap back into the slot and make sure it is not twisted or kinked. Snap the housing back together, put the lever back on, and screw it in. Test it and it should work fine. Hope this helps,

Jul 31, 2009 | 2005 Ford Freestyle

1 Answer

I cannot fold down seat


Try looking for a strap in your trunk it should be located at the upper inside of your trunk, there could be one or two straps, when you pull on these straps they act as a release lever for your rear seats, pull the straps toward you and push the seats forward from the trunk side.

Mar 11, 2009 | 2002 Oldsmobile Alero

9 Answers

Kia Sedona seat stuck


Got it, with the help and eyes of my wife. The rear latch releases as the seat back is lowered. This release is ALMOST seat back down (about 3 inches above the seat bottom). As the seat back lowers, apply constant lift on the rear latch, and it will release as the seat back lowers. Hard-won knowledge - I think I invented some bad words in the process.

Jan 03, 2009 | 2006 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...