Question about Cars & Trucks
U joint is stuck
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
That has alot to do with the price of the pump, i know there expensive. The thing to do is call an auto parts store and ask what the price is for a pump, once you know that, then you can call around to shops in your area and get there price or labor rates, and that will give you an idea what it will cost. I know its alot of calling but its the best way, so you can guard aginst being riped off. It should not take a good michanic more than 2 to 3 hours to chg. one.
Posted on Feb 05, 2009
they're shorting from the water running down the inside of your door...pull the door panel and install a sheet of plastic over the window controls with duct tape at the top, sortof like a "flap" over the top of the window switches...make it 5-6 wider than the switch area.
Your window "sweep" (at the top of the door) is most likely shot.
Posted on Jun 14, 2009
the labor time is 2.1 hours,but that does not include the drain and refill, hope this helps. information from ALLDATA 10.10. Please rate my fix as i strive to be the best, if you need more help get back to me
Posted on Nov 22, 2009
SOURCE: 1999 chevy tahoe can't change
It sounds like vacuum is not getting to the vent, heat and A/C controls. Find the vacuum can. It may be under the hood on one of the inner fenders. The "one-way" check valve is usually located in the line and close to the can, make sure it works properly. The valve could be the very thing that's causing the problem. Trace the lines back to the vacuum block at the intake manifold or fire-wall, and also back to where the line goes thru the fire-wall. Check the can for leaks or obvious holes. They used to be just a plain metal can, but it could be a plastic ball. Check the lines as you go, for breaks and rub-thru's. Move the controls thru all settings and listen for vent door movement. Worst case is a bad vacuum motor or air flow position selector switch, and/or a faulty Blend Door Actuator. If you have been driving around with the Temperature knob or control set at the same spot for months, move it from fully cold to fully hot several times and wait for the air temperature to change each time. This will help reset the blend door and vacuum control system. Hope this helps... Let me know what you find.
Posted on Aug 25, 2011
the sunroof stuck on open because a damage guide cable or dirt u have to take it off to see what it is for dirt is just cleaning if it is the cable try to get new or used ones if u cant get them then a new roof
Posted on May 05, 2012
Tips for a great answer:
Jul 03, 2014 | 1999 Chevrolet Tahoe
Aug 16, 2011 | 1999 Chevrolet Tahoe
Apr 06, 2011 | 1999 Chevrolet Tahoe
May 11, 2017 | 1999 Chevrolet Tahoe
Dec 16, 2008 | 1999 Chevrolet Tahoe
42 people viewed this question
Usually answered in minutes!