Question about 2005 Dodge Grand Caravan

Open Question

Code is p0700

P0700

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 328 Answers

SOURCE: OBD2 DTC P0700 &P0733

P0700 Transmission Control System Malfunction P0733 Gear 3 Incorrect ratio INFO FROM http://autorepair.about.com/cs/troubleshooting/l/bl_obd_7.htm
hope this helps.....good luck!

Posted on Dec 25, 2008

Ad
arauzvictor1
  • 466 Answers

SOURCE: P0605 and P0700 are the codes I am getting

first check whether the relay that feeds the transmission control module TCM is running and receives this feed

Posted on Aug 10, 2009

techbuster
  • 5081 Answers

SOURCE: code p0700 dodge neon sxt 2003

The first thing you need to be aware of is that fault codes do not tell you exactly what is wrong with the car and never indicate specific parts have failed. Fault codes only give an indication as to what circuit or system is behaving abnormally at the time.
The fault code P0700 from your engine control module means that there are fault code(s) stored in the transmission module as well. it is not an indication of a problem in itself; it is just a flag to alert the technician that he needs to scan the transmission controller for faults.
For the couple of model years i checked, there was no valid definition for a P0731 on the neon model. If you give me the exact year of the vehicle, i can check to see if there is a definition for this code for your car, but i can tell you that being a 700 series code it is going to be related to transmission operation.
To diagnose this type of fault code is going to require access to a professional level scan tool that is capable of accessing the trans control module for fault codes and stored data. O nce the codes from the transmission are read, then there will be a manufacturer's test procedure to follow to test operation of the specific circuits and components related to that code. This again is going to require a DRB-III scan tool or equivalent to display live transmission data as well as to run the test sequences involved in diagnosing whatever code is stored there.
So, for this reason my answer to your question would be that you should take this particular problem in to a shop with the required test equipment and a technician trained in Chrysler transmission diagnostics to be looked at before attempting any kind of repairs yourself. Some things can easily be diagnosed and repaired at home in the driveway with minimal equipment; this particular type of fault is not one of them.

Posted on Sep 07, 2009

  • 1757 Answers

SOURCE: I get codes p0700 and p0740 on a dodge grand

P 0700 = EATX (Electronic Automatic Transmission Communication) Controller DTC Present. = An automatic transmission input DTC has been set in the transmission controller.
P 0740 = Torque Converter Clutch. No RPM Drop at Lockup. = Relationship between engine speed and vehicle speed indicates no torque converter clutch engagement.

Yes the Fluid and Filter Change should take care of this. However, Dodge, Chrysler, and Plymouth Minivans have had alot of Transmission problems over the years. Make sure that whomever changes the Transmission Fluid that they use exactly what is specified. Also, do not let any Mechanic talk you into a Superflush of the Transmission. This procedure does not change the Filter.

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Jan 15, 2010

  • 340 Answers

SOURCE: 2003 Dodge Caravan Trouble codes

p0731 transmission shift problems
p0841 solinoid problems in the transmission
p0846 fluid level
p0700 solinoid stuck or sticking hard shifting
there is a solinoid in the transmission that shifts the trans and downshifts when stopping this is a problem you generally don't want to do your self

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I get code p0700 on 2004 dodge ram 1500 4.7 lt.


transmission system malfunction can be a few things the following links give some examples of different problems associated with p0700 code but more than likely if their is a noticeable problem than may have to have it diagnosed by a transmission shop
P0700 Transmission Control System Malfunction P0700 Dogge Ram Yahoo Video Search Results 2005 Dodge Ram 1500 transmission codes p0700 p0841 Transmission Automatic...

Aug 05, 2016 | 2004 Dodge Ram 1500

1 Answer

Transmission down shifting to 2 code po 700 or but it does not shift to 3rd gear anymore was resetting it 1st time lasted a month then every 2 or 3 weeks now i can"t reset it anymore no codes


P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

May 23, 2015 | 2006 Dodge Dakota

1 Answer

Can a bad idle air control valve cause a P0700 trouble code on a 2001 Volvo S40?


code p0700 refers to transmission control system/MIL--malfunction===causes--wiring--TCM

Code p0700 is a transmission code and you would have gear shifting and other faults.

Aug 23, 2014 | Cars & Trucks

2 Answers

What do the codes P1684 and P0700 mean?


Hi Rich Stuck,P0700 means Transmission Control System (MIL Request),P1684 means Battery Disconnected within last 50 starts.More read Diagnostic Trouble Code Table ,hope it can help you.

Dec 08, 2012 | 2002 Chrysler PT Cruiser

1 Answer

What do i need to replace to fix error code p0700 on a 2002 dodge intrepid


(DTC) CODE # P0700....Transmission Control System (MIL Request) Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it.

I hope this helps....let me know if I can assist further !!

Feb 21, 2011 | 2002 Dodge Intrepid

3 Answers

Car does not run ,I check the code ,it is P0700


Because it is not starting, you should replace the Crankshaft sensor (above the oil filter, back of the engine)-it will cause a P0700-I have a 99 SL2, 178,000 miles


DTC) CODE # P0700....Transmission Control System (MIL Request)
Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it. The dealer probably saw the code P0700 and went to the TCM and pulled out the code stored there telling them the Transmission Solenoid Assembly (TSA) is bad. This is a good example of understanding what the codes actually mean. If the manual you looked at said the TCM is bad and to replace the TCM when you see a P0700, then it is wrong.

Jan 24, 2011 | Saturn Ion Cars & Trucks

2 Answers

P0700 code?


P0700 is a code that tells u the TCM [transmission Control Module] has requested that the PCM [Powertrain Control Module] turn on the check engine light, u now need to ge the TCM tested for the transmission fault code(s) that were stored when the check engine light was turned on by the TCM through and by the PCM

Mar 31, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Check engine light on 2005 town and country 3.3


(DTC) CODE # P0700....Transmission Control System (MIL Request)

Translation:
Transmission Control Module (TCM) Malfunction or Failure.

P0700 Information Code

The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.

This code is for information ONLY. If this code is present, check for transaxle codes.


P1776: Solenoid Switch Valve Latched in Low/Reverse Position. The TCM monitors the L/R solenoid to ensure that the fluid transfer happens. It uses a Pressure switch to verify this. Usually this code is set by a switch that is stuck or a solenoid that is not mechanically operating.

A transmission shop would be better suited for this type of work.

Apr 11, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2005 Dodge Grand Caravan Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...