Question about 1994 Honda Civic Del Sol

1 Answer

Removable top I can get the passenger lever for the top removal to work but the lever for the driver's side won't move to release the pins.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

Pull the roof liner down. Unfortunately, you may have to tear it down and damage it, but unless you get the liner down you won't be able to see the problem.

Another possible solution, put a floor jack under the middle of the drivers side door opening and open both doors. Lift slightly, and see if it loosens the latch up. Some del Sol's get a little "saggy" in the middle after a few years.

Posted on Oct 18, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do u get the hood to open on a 99 vw passat if the pully is broke off


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.


tdisline_492.jpg


Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken part.

May 01, 2011 | 1999 Volkswagen Passat

1 Answer

Hello Experts, I seem to have a problem getting my hood release to work, what is the best way to get my hood open when the specified manner of opening the hood does not work? I like to be able to...


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.


tdisline_440.jpg


Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Apr 15, 2011 | Audi A8 Cars & Trucks

1 Answer

How do open the hood when the cable has broken on my 1999 audi a6 quattro?


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.


tdisline_353.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Mar 22, 2011 | 1999 Audi A6

1 Answer

I can't open hood of audi A4.


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_289.jpg


Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Please do rate my response. Thanks!

Feb 19, 2011 | Audi A4 Cars & Trucks

1 Answer

1999 Audi Quatro A6 hood release is not working. How can I open my hood?


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_200.jpg


Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Please do rate my response. Thanks!

Jan 29, 2011 | Audi A6 Cars & Trucks

1 Answer

Hello, I wonder if you can help.I cannot open the A4 bonnet, the release for the bonnet seems to have failed at the bonnet,so it will not open the primary release. Is there a mannual lever, or dose the...


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_159.jpg


Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Please do rate my response. Thanks!

Jan 16, 2011 | 2005 Audi A4

1 Answer

I have a 1996 Audi A4 Quattro, and the release lever in the cab will not unlock the hood. ive tried pulling te secondary release lever in the grille of the car and nothing happens. any idea of how I might...


Under the car:
You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_125.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Please do rate my response. Thanks!

Dec 21, 2010 | 1996 Audi A4

1 Answer

Bonnet cable broke of a4 audi


You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_113.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable.

Please do rate my response. Thanks!

Dec 17, 2010 | 2005 Audi A4

1 Answer

Hi, just tried to open the bonnet of my audi a6 '96 plate and only one of the two locks seem to open as only one side pops up meaning the lever does not come out of the grill to allow the bonnet to pop up....


You will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_81.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and repair or replace the safety release mechanism. This is very simple to remove out from the hood.

Dec 06, 2010 | 1999 Audi A6

1 Answer

I can "release" the hood on my 1999 Audi A4 from


Yes, you will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_0.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and repair or replace the safety release mechanism. This is very simple to remove out from the hood.

Nov 03, 2010 | 1999 Audi A4

Not finding what you are looking for?
1994 Honda Civic Del Sol Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...