Question about Cars & Trucks
If you are not getting the clutch to release , the system probably needs to be bleed not a longer Pushrod.
If it's not hydraulic clutch then there has to be an adjustment
Posted on Jul 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
did u try bleeding the lines ? if your changed every thing and still have nothing u might just have alot of air in the system
Posted on Dec 16, 2008
hi considering age of car and that you have no leaks on hydraulics? may i suggest you try bleeding the clutch to rid of old fluid a couple of pumps may be suffice ? b/fluid does absorb moisture and heat over time hence recommendation tat fluid be changed at period specified in handbooks ie 12 monthly ?
Posted on May 15, 2009
If the vehicle has been standing for some time (6 months or more) without use, the clutch plate facings may be 'stuck' to the flywheel and pressure plate surface.
To check/clear this problem:-
(with the engine not running!)
hold clutch pedal down - then from under vehicle, find an opening in the clutch bellhousing (such as a water drain slot) where you can see/access the edge of the clutch plate (sandwiched between the pressure plate and flywheel).
Use a screwdriver blade (or similar tool) to prise clutch plate free from flywheel face (only small movement is required).
If the above is not the cause of your problem, 1) the clutch throwout mechanism should be examined for problems,
2) the pressure plate is faulty- may need to be replaced.
Posted on Aug 29, 2009
JB weld will not work get it welded by a pro with the proper hi frequency welder otherwise you will have to replace the box ,and yes get a new cylinder ,hope you get sorted
Posted on Mar 03, 2010
Tips for a great answer:
May 17, 2016 | 2002 Ford Escape
Apr 16, 2014 | 1990 Dodge Dakota
Jul 15, 2013 | 1999 Ford Super Duty F 550
Aug 22, 2010 | 1997 Saturn SL
Dec 22, 2009 | 1995 Isuzu Rodeo
Aug 03, 2009 | Volkswagen Jetta Cars & Trucks
Apr 20, 2009 | 1992 Chevrolet S-10
17 people viewed this question
Usually answered in minutes!