Question about Cars & Trucks
Bulbs good. check all fuse in the car
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
Posted on Dec 31, 2008
need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.
Posted on Jan 19, 2010
SOURCE: brake lights dont work
Check the brake light switch, it is down on the brake pedal lever, you can dis-connect the wire connector at the brake light switch and check for broken wires at the connector, and then jumper the connector with a paper clip, if the brake lights come on then replace your brake light switch.
There might be more than one switch attached to the brake light pedal lever, the brake light switch usually only has two wires going to it when there are two switches.
If there is no problem with the brake light switch then you can suspect the turn-signal switch to be at fault, as all of the running lights, turn-signals, brake lights, and hazard lights are all ran through the turn-signal switch. You can also try stepping on the brake pedal and wiggle around the turn-signal switch and see if the brake lights flicker or come on.
Posted on Apr 26, 2010
SOURCE: brake lights don't work
This sounds like a bad brake light switch, this switch is located on the bracket that holds brake pedal,you can test for power at switch,also if you remove connector and jump terminals with a wire and see if lights lite, if lights light then switch is bad,
Posted on May 27, 2010
Tips for a great answer:
Nov 01, 2014 | Toyota Tacoma Cars & Trucks
May 08, 2013 | 1998 Chevrolet Lumina
Jan 21, 2011 | 1989 Toyota Camry
Jan 06, 2010 | 1987 Toyota Celica
Feb 02, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Jan 08, 2009 | 1994 Toyota Previa
Oct 20, 2008 | 1991 Volvo 240
May 21, 2018 | Cars & Trucks
358 people viewed this question
Usually answered in minutes!