Question about 1998 Plymouth Breeze
The bolts go in the holes where the starter mounts to the bell housing.
Posted on Jul 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 plymouth breeze
If you keep popping fuses everytime you try to start the car, you have a bare hot wire grounding out somewhere. That will cause the fuse to pop everytime you turn the key on. the best way to fix it is if you know someone who is good with electrical wires. Have them pull the fuse panel out and follow the wire until they find where the wire is bare. Have them fix that bad spot and that should fix your problem.
Posted on Aug 04, 2008
SOURCE: How do I change the
look around the power steering pump, (Under or maybe behind) you should see a belt tensioner, loosen it and any other brackets close to that have a sliding point, once loose, the belt should slip right6 off, pay close attichion to the way it comes off, you don't wanna put it back on backwards, or your water pump will run in the wrong direction and cause it to over heat
Posted on Jan 08, 2009
Your E-brake cable needs a to be loosened up and you need to see if the E. Brake is locking up, if the cable is not frayed then you have a problem with a check valve in the master cylinder or in the T where the line goes to the left and right. If you want to know how to check out the hydraulic problem it is more detailed, but first you must make sure that the mechanical part is not binding up.
Posted on Jun 15, 2009
I would expect teither the power steering pump or the steering rack has failed. The good fluid in the unit is just not being put to use.
I hope this may have helped,
Posted on Oct 27, 2009
you'll have to drop the oil pan,after that you see a long tube with a round screen on the end of it at the top of the tube is the oil pump
Posted on Jan 13, 2010
Tips for a great answer:
Oct 09, 2016 | 1998 Plymouth Breeze
Mar 30, 2015 | 1998 Plymouth Breeze
Nov 02, 2014 | 1998 Plymouth Breeze
Feb 13, 2012 | 1998 Plymouth Breeze
Jun 06, 2011 | 1999 Plymouth Breeze
Mar 15, 2010 | 1998 Plymouth Breeze
Feb 03, 2010 | 1998 Plymouth Breeze
Feb 18, 2009 | 1998 Plymouth Breeze
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: