Question about Cars & Trucks

Open Question

Weldex backup camera problems

Camera works good and the suddenly goes light or completely dark, then comes back on like nothing ever happened. When set to night setup it gets so dark you can hard see out of it.

Posted by on

  • Ken ooney Jul 17, 2013

    Camera seems to go dark where you can't see out of it, If you turn it off and on sometimes it fixes problem then screen is clear.



6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: tail lights and odometer lights dont work

I had the same problem with my 1993 Grand marquis.There is a relay on the passenger side under the hood for the DRL( Daytime running lights)that was bad.I changed it and all is good again.

Posted on Sep 20, 2008

  • 202 Answers


ASE Mechanic:
with out any schematics you can trace these wires down by finding the reverse lights, and disconnecting the bulb and installing a test light, and with a buddy put in reverse while you check to see which wire gets hot!!!!!!!!!!!!!!!!!

Posted on Jan 27, 2009

  • 2 Answers

SOURCE: 2001 Suzuki XL7 has problem with front light.

My 01 did this two all i did was replace the socket and a foot of wiring a month later i had to do it on the other side as well so you might do it all at the same time.

Posted on Sep 06, 2009

  • 88 Answers

SOURCE: i have a 1992 Mercedes s500 which occasionally the

Suspect idle control motor, although mass air flow sensor problems have sometimes been related to idle surge. Have pcm codes pulled for further diagnosis.

Posted on Dec 26, 2009

SOURCE: rear backup camera

the camera is at the liftgate

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Honda crv reversing camera not working how can i check it

Do you see anything on the screen? Does the screen switch to display the camera and just comes up blank? Is there any message?
It's possibly a broken wire. You would have to access the wiring to check for voltage at the camera.
Make sure your backup lights come on when in reverse. Some systems often use the voltage to the backup lights to activate the camera. If the switch is messed up and the lights don't come on, it might be the problem.

May 09, 2017 | Honda Cars & Trucks

1 Answer

No image , transmitter light comes on in reverse . definetly power to both units .

Troubleshooting Peak Wireless Backup Camera Monitor ...
Troubleshooting Peak Wireless Backup Camera Monitor LED Blinks but No ... Select Your Vehicle .... the blue light on the monitor blinks continuiously and I have no picture on the monitor? ... If so, it will only come on when the truck is in reverse. ... still blinking and you have no picture, then you need to look at the transmitter.

4UCam Backup Camera Test Cases
We do not have all different kinds of RVs, tailers and so on for the actual testing. ... for under 30 feet), the 8907T/8908T comes with a transmitter which is detached from the camera. You can fix the ... Wireless Car Backup Camera Series ... reverse gear, thereverse lights go out and the camera stops sending an image. At the ...

Dec 28, 2015 | Cars & Trucks

1 Answer

2011 Dodge Grand Caravan backup camera stopped working

My backup camera has not worked for a long time. I think the camera is a defective product and should be resolved by DODGE

Feb 24, 2015 | 2011 Dodge Grand Caravan

2 Answers


Hi Jim
You have to connect the negative to the vehicle body, and the positive to the reverse light wire.
this way the camera will comes ON when you put the selector in reverse.
Good Luck

Apr 09, 2014 | 2007 GMC Sierra 1500

1 Answer


I had similar intermittent camera problem after it got worse I decided to get fix. I took picture on way to dealer to show the problem this made no difference since it did not prove it came from my car. The service manager said they had to duplicate the problem before they could fix since it could be caused by wiring, radio or camera. I assume it would not happen at the dealer and made myself a pain while I waited to see if they could duplicate. After an hour of waiting I check to see the status and the manger said they were replacing the camera. A week later and the camera has worked perfectly.

Aug 11, 2012 | Hyundai Sonata Cars & Trucks

1 Answer

2001 Sequoia rear brake lights not working

Check the trailer hitch tap connector in the frame near the rear bumper for corrosion. Use dielectric grease and reconnect the connector

Jun 18, 2017 | 2001 Toyota Sequoia

1 Answer

Wiring diagram for Weldex WDRV 3057

The pin configuration for the weldex camera is as follows: (when looking at the camera plug) : upper left pin=12v+ , lower left pin=audio out , upper right pin=video out , lower right pin=ground(also common for the audio & video out.

Oct 10, 2011 | Cars & Trucks

1 Answer

2008 nissan armada backup camera wont work

make sure your backup lights are coming on. if the backup lights are working when in reverse then most likely you have a bad camera or loose connection. also may want to check for power to the camera ( fuses/circut).

Jul 30, 2011 | 2008 Nissan Armada

1 Answer

2000 jaguar XJR. pressing accelerator - nothing happens -

if its a v8 its gonna be your throttle body its a complete assembly and is a common problem on these models

Apr 11, 2017 | 2001 Jaguar XJ8

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides