Question about Cars & Trucks

Open Question

I have a rieju rs3 125, the electrics went off then my engine cut out, now wen i turn the ignition nothing happens and it wont bump start either, my battery has got life in it (i tested it lol) so i dont know whats happening with it, can anybody help me please

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 205 Answers

SOURCE: Turn key, nothing happens

It could be the park/neutral switch, next time it doesn't start try wiggling the shifter in park while turning the key, or shift to neutral and see if that will work. if that doesn't change the problem I would replace the ignition switch.

Posted on Mar 20, 2009

  • 199 Answers

SOURCE: 2004 FORD TAURUS WONT START. WHEN TRY TO TURN

just a wild shot in the dark are the battery cables on real tight also you should get @ 13 vdc on a good battery

Posted on Jun 27, 2009

tjspear
  • 66 Answers

SOURCE: turn the ignition key and nothing happens. turn it

when it won't start, use a test light on the solenoid wire (the small gauge wire) in the start position, you should have voltage. Also check your shift linkage to make sure the shift cable isn't keeping it from going into park position. try it in neutral position as well... that's a clue to a trans selector switch

Posted on Sep 12, 2009

  • 1 Answer

SOURCE: 2001 Jeep Grand Cherokee Limited wont start.

Your reply really sucks.

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car wont start after leaving key in ignition,ie went to start car, but phone rang, key in ignition, now wont start.this has happened my wife on several occasions. starts fine on a push


Check the fuse box for the starter relay, and pull out to check pins for corrosion / bad contact. The fact it start on a bump with the key on leads me to suspect the start / crank position of the electrics. Get a knowledgeable person to run through the crank circuit with a meter, also check the condition of earth straps and starter cables. Could be the ignition switch is faulty?

May 14, 2015 | 2006 Saab 9-3 2.0

2 Answers

Ok 03 Yukon, at first not running but after being towed home it hit a bump and all the lights came on. Took it off the wrecker it started right up, but nothing electrical in cab works, and now it won'


It might possibly be the ignition switch, or the linkage to it.

They reason I suspect this is your statement, "I bumped the key forward and it will engage the starter but still wont shut off"

The part where you insert the key is really a "cylinder lock", that then transfers the turning motion to the actual "ignition switch"

My wife had a Pontiac (also a GM product) that the cylinder lock had a linkage that went to the ignition switch (similar to a sliding electric switch, with the 4 positions, ACC, OFF, RUN, START), which was bolted on further down the steering column, underneath the plastic covering on the column.

Another person here had a similar problem, and after suggesting this, he wrote back that he removed his steering column cover and found a screw opposite the cylinder lock that had loosened and fallen out.

So you could try removing the steering column cover and see if all is ok.

Also, when you have it opened up, observe the action as you turn the key, as the problem could be the cylinder lock itself.

Jan 28, 2014 | 2003 GMC Yukon XL

2 Answers

1999 Crown turned ignition switch to start - heard pop - no electrical power


If nothing works including the lights, something happened between the battery and the fuse box.
There are some fuseable links between the battery and the starter solenoid or between the solenoid and the fuse box.
I'd start with the battery cables and look for those fuseable link wires.

Jul 09, 2012 | 1999 Ford Crown Victoria

1 Answer

My rover 25 wont turn over, when i turn the key theres nothing but the car will bump start


When you say Bump start, are you talking about push starting your truck?That being the case, I would look at your fuses first, to see if any of them are blown. If you find any blown, just replace them, and try to start it again. Your owners manual should have the location of all your fuses, and what they do. Any that are labeled ignition (ign) would be a culprit if you find it's blown. If you don't find a blown fuse, you may be looking at a solanoid, or starter. Let me know what you find.Dennis

Feb 21, 2012 | Cars & Trucks

1 Answer

I have bmw 316i n reg went out to start it and there was nothing it would bump start so i changed starter motor and next day was fine then day after it done it again does anyone know what it could be...


there may be a damaged wire coming from the receiver ring which sits round your ignition lock, this "reads" your key and allows the starter to turn your engine over so if there is an intermittant fault here that could cause your non-starting.

Jul 18, 2010 | 1996 BMW 318

1 Answer

Hyundai Tiburon Won't Start


Possibly the alarm cut-off switch? or Ignition key switch (or wires) going bad?

But you mentioned you tried to jump start it and it did turn over?
IF so, you could have severe corrosion or loose connections of the battery cable both at the battery and at the termination points, such as ground and starter motor.
Check that the battery wires are tight and clean at the battery posts and at the other end.

Again the No lights suggests either the alarm cut-off, or an absolute disconnected battery cable.

Finally, it could be ignition fuse, Check fuses. Ignition key switch.

What makes this hard is that you suggest it would turn over with another battery connected. This makes no sense.

Good luck

Mar 16, 2009 | Hyundai Motor 2000 Tiburon

1 Answer

Electrical problem i think, wen i went 2 started it it wouldnt


i would get a friend to tap on startermotor body with a shifter or something and if car starts when being tapped by friend and you turn key,you need to get startermotor looked at or new one..

Mar 02, 2009 | 1991 Daihatsu Rocky

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...