Question about Cars & Trucks

Open Question

Bonnet release catch on a Nissan almera

Where is the bonnet release catch on a Nissan almera. I have pulled the handle inside the car and the bonnet pops up but cannot find the lever to be able to open fully

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: trunk release handle will not open trunk when pulled

just need adjusting or probably the wire is broken/loose

Posted on Mar 14, 2009

  • 4793 Answers

SOURCE: Where's the bonnet/hood release lever for a 2003 VW Golf located?

you will find a black lever either on the right or left kick plate (that is the trim piece from the floor to the dash on the outer floor pan) inside the car, under the shelf, under the glovebox depending whether left or right hand drive.is is a bit dark to see it tucked up as it is.

Posted on Mar 10, 2010

michael4wgv
  • 166 Answers

SOURCE: I pull the red lever inside the car to open

The release catch should be just to left from the center in the second row down. It should spring out as you pull up on the hood. If not then it may be broken but you can use a hook tool to pull back the safety catch to open the hood.

Posted on Oct 08, 2010

  • 508 Answers

SOURCE: when you want to pop

At the left floor the cable that releases the hood is behind the kick panel. The plastic handle that broke off can be accessed by removing the panel and you will see the last bit of the plastic handle that is threaded on the steel rod. I an emergency you can grab the rod with pliers and pull to release the hood (bonnet). Go to you local dealer and you can order a new handle or go to a wrecking yard and find your car model and just remove and purchase the used handle. You may be able to grab the rod that the handle broke off from with out removing the panel. Good luck.

Posted on May 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front bonnet catch wont release fully,i pull lever from inside and it releases bonnet just a couple inch, then when try to lift bonnet up it wont open. regards mike, and thanks in advance


There is another lever at the front of the car that you need to release too. This is to prevent the hood flying open if you accidentally pull the release while driving. After you release the latch inside the car, go to the front of the car, near the Audi rings in the center of the grill there is a small black tab that pops out. Pull up on it and the hood will open. Let us know if that worked.

Oct 23, 2013 | 2002 Audi A4

1 Answer

Can you tell me how to install my release cable & handle on town & country1995


Do you mean bonnet release? If so loosen cable/wire by bonnet catch make sure it's free of any cable ties and clips, and is loose. Also inside vehicle try to remove any type of covering behind bonnet lever/handle, then undo any clips pins or nuts that hold handle in place. If you securely attach some wire or strong string to the end of the cable under the bonnet, and carefully pull it into the vehicle, disconnect old cable attach new, then pull it back into the engine compartment. Your cable should be in place ready for reattaching the lever, and bonnet catch.

Jun 03, 2013 | Cars & Trucks

1 Answer

Bentley gt bonnet release


Pop opens the hood
Pull or push the hood release until you heard the hood pop opening whether the hood release is inside your vehicle. However, you need to look anywhere for 2013 Bentley Continental GT W12 and through the grill, carefully feel under the grill and finally behind the bumper to find a lever, arm, button or handle if the hood release is apparently at the front. And then press, pull or push it from the front to back, side to side until finally it can release the hood.
Even though the hood will just open a tiny, it will possibly be stopped by a safety catch which is a metal lever. You should release the hood when you pressed one way or other in order to open all the way. When you are driving, this gizmo accidentally avoids opening the hood.
Raise the hood fast with one hand
Feel along the station between the grill and the hood for the safety catch with the other hand. The rest of the way is to release and raise the hood.
If it is necessary, secure the hood
It is fine if the hood can stay up easily all by itself for 2013 Bentley Continental GT W12. Only if it does not like that, you should have to find a hoop prop which is a thin and long metal rod attached to the bottom edge of the opening hood or to the underside of the hood. In other words, either lift or lower the rod and fit the finishing of it into the slot which is provided to hold it.
https://electronicshelponline.blogspot.com/

Mar 03, 2012 | Bentley Continental GTC Cars & Trucks

1 Answer

When you want to pop the bonnet you firstly release the catch from the passenger side footwell, them you pull the plastic release device which pops out from under the bonnet, if the plastic release device...


At the left floor the cable that releases the hood is behind the kick panel. The plastic handle that broke off can be accessed by removing the panel and you will see the last bit of the plastic handle that is threaded on the steel rod. I an emergency you can grab the rod with pliers and pull to release the hood (bonnet). Go to you local dealer and you can order a new handle or go to a wrecking yard and find your car model and just remove and purchase the used handle. You may be able to grab the rod that the handle broke off from with out removing the panel. Good luck.

May 09, 2011 | Ford Fiesta Cars & Trucks

1 Answer

S864XOP Ford Fiesta Zetec cannot open bonnet - when I pull release lever under steering wheel bonnet does not release completely (when push down on bonnet I can hear the catch click closed). Any...


get assistant to push down on bonnet whilst you pull the lever ,then once you pull back the lever and hold it back they try to lift it so it clicks up a bit then you open it by the safety catch

Apr 24, 2011 | Ford Fiesta Cars & Trucks

1 Answer

I have a 2003 mecedes benz when i pull the handle on the inside the hood only pops up on one side.


HI there are two bonnet latches and a cable that joins the two together that stretches sometimes or doesnt pull hard enough to open the other side to get the bonnet open pull the release handle and get a freind to slap their hand hard on the bonnet in the rough area of the bonnet catch it should pop open when you do get it open check the operation of the catch with the bonnet up by pushing a screwdriver across the catch to lock it the pull the realease and see if it will open the catch plenty of penetrating oil around the catch and grease after that should get it working again

Feb 23, 2011 | 2001 Mercedes-Benz C-Class

2 Answers

I pull the red lever inside the car to open bonnet, but PLEASE where is the release catch behind the grill on a Mercedes E300.


The release catch should be just to left from the center in the second row down. It should spring out as you pull up on the hood. If not then it may be broken but you can use a hook tool to pull back the safety catch to open the hood.

Oct 08, 2010 | 1996 Mercedes-Benz C-Class

1 Answer

On Pulling Release handle in drivers footwell. No resistence is felt. suspected broken cable. Require a method of releasing bonnet catch or gaining access to cable locations .


REMOVED PANEL FROM UNDER THE BUMPER AND REACHED UP TO THE TOP OF BONNET AND LOCATED CABLE. PULLED ON CABLE WHILST 3RD PARTY PULLED BONNET LEVER IN DRIVERS FOOTWELL. BONNET RELEASED.

Jan 08, 2010 | 2003 BMW 7 Series

2 Answers

Cant open the bonnet


Hi there, remember the bonnet opens back to front so you need to lift it from the windscreen side, hope this helps.

Mar 12, 2009 | 1983 Nissan Pulsar

1 Answer

NISSAN Micra 1.2 Acenta+


Hi there, should be to the right of the catch just before the right indicator grill, slide it left and pull open bonnet.

Feb 26, 2009 | 2005 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...