Question about 1992 Toyota Land Cruiser

Open Question

Prado 4WD My 1994 Prado selects 4WD when I move the Hi/LO Range lever to Low, but drops out of 4wd a few seconds later, but stays in low range. I can overcome the problem by pushing the H4 button.

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

seanpwright
  • 2030 Answers

SOURCE: 1998 toyota 4runner. the transfer case shifts into

Sounds like the motor on your transffer case is either gone bad, or needs adjusted.

Posted on Oct 31, 2009

  • 1 Answer

SOURCE: i have a 2000 4wd tacoma with manual locking hubs

my four wheel drive wont work on my toyota tacoma 2003 , when i put it in four wheel drive the transfor case does engage the shaft going to the front end but the hubs will not lock in

Posted on Feb 10, 2010

emissionwiz
  • 75130 Answers

SOURCE: Toyota 100 series landcruiser won't engage into low range 4wd

You need the dealer to diagnose this. Sorry it is not a do at home repair.

Posted on Oct 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford ranger - Where is the 4x4 actuator located


On the transfer case
Transfer Case - Electronic Shift
The four-wheel drive electronic shift-on-the-fly feature electrically shifts the vehicle transfer case between 2WD, 4WD HIGH, and 4WD LOW. The system mode is selected by the operator through the mode select switch (MSS) on the instrument panel. The operator is informed which mode the system is in by two instrument cluster indicators: one for 4WD HIGH which appears as 4WD, and one for 4WD LOW, which appears as 4WD LOW. Shifts into 4WD HIGH can be made at any speed. When shifting into 4WD HIGH with the vehicle stationary, tooth blockage may occur preventing shift completion. When the vehicle is driven above 8 km/h (5 mph) the shift will complete. When shifting in or out of 4WD LOW, the four-wheel drive (4WD) control module requires that the vehicle speed be less than 5 km/h (3 mph), the brake pedal be applied, and the transmission be in NEUTRAL (automatic transmission) or the clutch pedal be depressed (manual transmission).
The gearmotor encoder assembly is mounted externally on the transfer case. It drives a rotary cam which moves the mode fork and range fork within the transfer case between the 4WD HIGH, 4WD LOW, and 2WD range positions.
The four-wheel drive (4WD) control module controls the gearmotor encoder assembly that shifts between 4WD HIGH, 4WD LOW, and 2WD modes.

Mar 17, 2017 | Ford Cars & Trucks

1 Answer

98 Grand cherokee all time 4x4 wont shift into 4 lo


older post 1month
you failed to say what tires are touching, dry pavement or ice/snow or off road...... MATTERS big time.......!

the operators guide tells you not to do that.
the rules for 4Hi and low are different. RTM? yet?
last year ZJ
Quadra-Trac(tm) NV242 box. it is. full and part time box.
what does it (oper guide)tell you.
stay out of part time on dry roads. (clear?)
rule 2, save rule for Low Range.
low range is not full time 4wd.
if you fail to believe it , it will wind up and go crunch

here is the direct quote.... see last line,,, its 100% real.


25794037-bn3fg1eepmrl330iewfulw43-1-0.jpg i you had the NV231 box, all gears are Part time, all 4wd gears stay off dry pavement.

Jul 23, 2015 | 1998 Jeep Grand Cherokee

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

94 explorer, manual trans. last night while driving, 4x4 and low range lights flash on then off. when I shifted into 5th getting on freeway, lose all drive power as if clutch suddenly went out. 4x4 light...


It sounds like the bearings inside the transfer case are going out, with pressure on it while accelerating its fine, then when you push in the clutch the transfer case gets slack allowing the internal parts to move, causing the lights to flash as gears move causing the shift motor to move. I would start looking for a replacement transfer case.

Feb 18, 2011 | 1994 Ford Explorer Limited

2 Answers

My 4x4 is stuck in four wheel low it is shift on the fly and i have already replaced the transfer case motor


Ok here is a long shot but sometimes it will work. Put the 4wd position switch to 4wd Lo, put your transmission in reverse and back up for about 50 yards, stop and put your transmission in neutral, then shift the 4wd to 4wd hi, wait a few seconds and shift the 4wd to 2wd hi, Sometimes the t-case will get stuck and this is how you reset the computer. I have known people that really got their t-cases messed up because they thought that shift on the go meant that they could shift the t-case into 4wd LO while moving but shift on the go is only for 4wd hi the gears will not mesh up fast enough for 4wd LO because the ratio is 1 to 1 . I hope this helps you.

Feb 08, 2010 | 1990 Ford Bronco

2 Answers

1996 chevy blazer will not go into 4wd hi but it will go in to 4wd lo. when you push the 4 Hi button it just flashes and then does nothing.


The major components to this system are a shift control motor that is mounted to the transfer case, and a shift control module that is behind your center console. since the transfer case is still shifting into 4wd lo, the shift motor is still moving somewhat, so the most likely cause is the shift control module, but there isn't an easy way to troubleshoot between the two...

Nov 16, 2009 | 1996 Chevrolet Blazer

2 Answers

Stuck in Lo Range 4WD. Suggestions?


Try key in run position(without starting it) and try to shift it into 4wd high with the shift lever in neutral.

Apr 26, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

Can't select 4wd low range


The jeep trnsmission should be in neutral before shifting to 4wd low.

Feb 08, 2009 | 1996 Jeep Cherokee Country

2 Answers

4WD Hi does not work on 96 Chevy K1500 Suburban


we had this same problem, under the car there is a modular,near the transfer case, it just unlugs and plug a new one in.20 min.. it is approx. $80.00 item,$ 350.00 to have it done. we were in yellowstone when we had this problem. hope this helps

Jan 08, 2009 | 1996 Chevrolet Suburban

Not finding what you are looking for?
1992 Toyota Land Cruiser Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...