Question about Cars & Trucks

Open Question

2007 Chevy Tahoe reverse light come on when you apply the brakes

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2001 Chevy Tahoe with ABS & Brake light on.

I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.

Posted on Nov 24, 2008

Ad
emissionwiz
  • 77202 Answers

SOURCE: 2001 Chevy Lumina brake lights not working

test and replace the brake light switch, it is located at the top of the arm the brake pedal is attached to.

Posted on Mar 26, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 12744 Answers

SOURCE: 2007 chevy tahoe driver side door handle will not open door

the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix

Posted on Mar 13, 2010

Testimonial: "Thanks I thought it might be a cable or linkage. Much thanks"

  • 312 Answers

SOURCE: how to change the brake light on a 2007 chevy

Open the rear hatch and locate the area behind the light you wish to change. You will see two screws that hold the assembly in place. Remove those two screws and push the pins through and the whole assembly will pop out allowing you to access the bulb by twisting the connection and pulling it out. Installation is the reverse. Good luck.

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace brake light swtch in a 1999 chevy tahoe


The switch is attached to the brake pedal. Remove the wiring connector and the switch will either have a clip securing it or will be held in place with a plastic bushing. If a plastic bushing is used, a gentle pull will be needed to remove the switch. Install in reverse order and check brake light operation for switch operation/adjustment

Jun 07, 2015 | 1999 Chevrolet Tahoe

1 Answer

Tahoe tail light


maybe a bad earth on the left rear lights

Apr 02, 2014 | 2007 Chevrolet Tahoe

1 Answer

2003 Chevy Silverado When I apply the brakes the


I had an issue like this one on a 2007 Colorado. I assume you mean the turn signal indicator inside the truck lights up. It was a bad bulb. think it was the turn signal bulb on the side that is lighting up. As for the gear indication being dim there is more than one bulb that lights them up and one may have blown. I hope this helps.

Jul 15, 2011 | 2003 Chevrolet Silverado 1500

2 Answers

My 1995 Chevy Tahoe brake light switch wont stay in position and the brake lights stay on. I replaced the switch and had the same problem.


Brake Light Switch REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Disable the SIR system (if equipped).
  3. Remove the clip (R/V Series) or unclip the switch (C/K Series) and unplug the electrical connector from the brake light switch.
  4. Remove the switch.
  5. Installation is the reverse of removal.
prev.gif next.gif

Oct 07, 2010 | 1995 Chevrolet Tahoe

1 Answer

How to change the brake light on a 2007 chevy tahoe the rear one


Open the rear hatch and locate the area behind the light you wish to change. You will see two screws that hold the assembly in place. Remove those two screws and push the pins through and the whole assembly will pop out allowing you to access the bulb by twisting the connection and pulling it out. Installation is the reverse. Good luck.

Jun 10, 2010 | 2007 Chevrolet Tahoe

2 Answers

Reverse and interior lights out, chevy express van


Fuse block under the hood. Driver's side, under the brake master cylinder. Number 18. TCB#2. Replace the fuse.

There is an under-engineered ground in the reverse circuit. If you back up with the dome lights on, it could blow that fuse. There should be some extra fuses under the cover of the fuse block.

Apr 25, 2010 | 2007 Chevrolet Express Passenger

3 Answers

My reverse lights will not come on my 2007 Chevy Tahoe. I have checked the fuse and lights. They are both in good condition. What else can be checked.


check the back up switch on the transmission,you can jump two wire to make the light work,if they don't light then it will be a wire problem

Dec 15, 2009 | 2007 Chevrolet Tahoe

1 Answer

Left rear turn signal, brake light and reverse not working


Did you ever figure this out? I've got the same exact problem with my tahoe.

Apr 11, 2009 | 1999 Chevrolet Tahoe

2 Answers

99 chevy tahoe keeps blowing tail light


check for short in tailights. or this happend on my tahoe but it was the factory trailer wires that had a short under the rear of the truck.

Feb 12, 2009 | 1995 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...