Question about Cars & Trucks

Open Question

Huskee 4200 13aj771q

Will not start unless primed.Will not stay running

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: IT WONT START OR STAY RUNNING UNLESS I KEEP PRIMING IT ITS FUEL INJECTED 4.3 VORTEC

Hi Palmer Jay, Take the vehicle for a diagnostic scan and have the fuel pump pressure checked at the same time. It sounds to me as if the pump may be defective and not giving the correct pressure. Also have them replace the fuel filter. Regards John

Posted on Jun 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My suburban has to be primed to start


There is a separate circuit and relay that primes the fuel system when you start the vehicle. If you sit in a silent location and turn the key to the ON position (without cranking), you should hear the fuel pump run for about 5-6 seconds. This is to bring the fuel pressure up in order to let the vehicle start. Then the normal pump circuit takes over. Sounds like your priming circuit is not working. I would try the relay first.

Feb 07, 2014 | 1997 GMC Suburban

1 Answer

IT WONT START OR STAY RUNNING UNLESS I KEEP PRIMING IT ITS FUEL INJECTED 4.3 VORTEC


Hi Palmer Jay, Take the vehicle for a diagnostic scan and have the fuel pump pressure checked at the same time. It sounds to me as if the pump may be defective and not giving the correct pressure. Also have them replace the fuel filter. Regards John

Jun 20, 2012 | 1995 GMC Jimmy

1 Answer

I have a 1992 camaro RS 305 with 5 speed. It will turn over but won't start, if you pour gas in throttle body it will fire right up and run like it should. I put in new fuel pump, new ECU, new TPS, still...


If you turn the key to the on position and you hear the fuel pump run, does it run for longer then 5 seconds? If so then you are going to need to look at your fuel filter, if it stays running then you are going to need to look at your fuel regulator. You can also go to Auto Zone and buy a fuel pressure test kit or rent one, and check your fuel pressure on the fuel rails. Check for spark also, if you are low on spark then you are not going to fire, unless you dump more fuel then you need to into the throttle body.

Nov 07, 2010 | 1992 Chevrolet Camaro

1 Answer

The car quit running after starting. When I tried to start it again, it acts like it's not getting fuel. It turns over normally, but won't fire.


Follow air filter hose to injector prime injector see if it starts if you keep priming and it wont stay running replace fuel filter if that don't work you have a bad fuel pump.

Sep 14, 2010 | 1996 Lincoln Continental

1 Answer

Cant get car to stay running has fuel delivery starts with chem start but wont stay running


replace the fuel pump relay
the priming switch operates fine if starts although after the priming switch does its job the fuel pump relay takes over

Sep 06, 2010 | 1992 Buick Regal

1 Answer

Silverado not starting unless prime


There is a check valve in the fuel pump that sounds like it may have gone bad. Check the fuel pressure at the shredder valve, there should be 60 to 65psi during the prime and will drop 5 psi when the engine is running. Once the fuel line is primed, check to see how fast you lose your prime. Since you replaced your injection system, we can eliminate the fuel pressure regulator leaking which was common on the injection system your truck run's on. If the fuel pressure drops fast then it's going to be a bad check valve at the fuel pump and it may be time to replace the fuel pump it self. Good luck and hope this helps. Note: do not try to start the engine with putting gas through the throttle body, it's been know for small fires to start and burn the spider injectors. 

Sep 04, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

97 GMC Sonoma


checked fuses , #9 fuse for fuel pump was loose.

Jun 21, 2008 | 1997 GMC Sonoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...