Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'm curious, does this vehicle have an alarm/remote starter? If so I expect the installer didn't wire it correctly ... it was an all too frequent issue, with inexperienced installers we had .... I would first suspect any add-on device first (if any) ... In answer to your question ... I know it does have a relay (Starter solenoid is a relay and built onto the starter) As far as it being a relay or the IGN switch ... I'm skeptical.
Posted on May 05, 2009
ASD is in the engine compartment fuse block.
The pump relay should be there also. Check your fuse panel in the truck though.
Fuses, Relays & Circuit Breakers The fuse panel box is to the right of the glove box with the glove box door opened or beneath the instrument panel (dashboard) on 1989-93 models.
Pull out the fuse panel for access to the blade type fuses
Posted on Oct 18, 2009
releys are grounded every where try checking the motor and the body grounds
if all else fails run a new ground 1 to the frame and 1 to the body as likely it has a bad body ground
Posted on Jan 06, 2010
Testimonial: "i have yet to try it but it dose help thanks"
The fuse it doing it's job, you have a short ( Wire that is connected to a ground, that draws too much power )
If you have an electrical schematic ( Repair manual ) find out which wires are connected to that fuse and check them for any chaffing, cuts, unnesassary twists, or corrosion.
If you have a ohm-meter, isolate the system ( by disconnecting the fuse, and other connections. Then check for any resistance on wires that should not be connected ( because you disconnected them ) by having one Lead on the wire's connector and the other meter-lead on your car's frame. A good wire will not have continuity if it is isolated.
Posted on Apr 10, 2010
Tips for a great answer:
Jul 15, 2015 | 1992 Dodge Dakota
Feb 21, 2015 | 2000 Chrysler Sebring
Oct 23, 2013 | Cars & Trucks
Oct 07, 2012 | 2004 Dodge Stratus
Aug 29, 2017 | 2000 Dodge Stratus
May 17, 2011 | 2004 Dodge Stratus
Apr 07, 2011 | Dodge Grand Caravan Cars & Trucks
Mar 26, 2011 | 2000 Dodge Stratus
Mar 11, 2010 | 2001 Chrysler Sebring
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: