Question about Hyundai Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
p2004 (Intake Manifold Runner Control Stuck Open)You need to take a look at the IMRC actuators on the intake manifold. You can try using a screwdriver or other tool to move the actuators to see if one is stuck in the open position. Do not use your fingers to do this, because if one is open and decides to close it has a bit of force behind it and can injure you. If the IMRC is stuck open, it is usually due to deposits in the intake manifold. Repair involves removing the upper intake manifold and cleaning out any deposits in the IMRC plate area. I would try running some Techron Concentrate in 2 tanks of gas to see if it dissolves enough of the gunk on the plates to free up the stuck one. Certainly a lot cheaper than having to pull the intake manifold and cleaning the plates. Always run tier one gasoline like Shell or Chevron to reduce the buidup of deposits.
Posted on Dec 19, 2008
A common problem on Windstars, there are two IMRC valves, the only way to fix them is replacement, which is not that hard. They are mounted on the end of the intake manifold and control runner length. There is a front and rear one, I'm not sure which one this is but you'll probably have to go to Ford to buy it and they should be able to tell you with the code number. The problem will not affect driveability that much, but if you have emissions testing at your location, this will likely cause it to fail.
Posted on Apr 05, 2009
SOURCE: Check engine light came on
THERE IS A VALVE ON THE RIGHT SIDE OF THE INTAKE MANIFOLD THAT OPEN THE RUNNER.IT HAS A VACUUM LINE TO IT.FOR IT TO BE STUCK OPEN EITHER THE SOLENOID IS BAD,THE VACUUM LINE IS BAD OR THE RUNNER IS GUMMED UP WITH CARBON AND STUCK OPEN
Posted on May 15, 2009
you don't have to replaced the manifold just the runner control. see this all the time at work the part is about 175.00 and an hour and a half to install. your local dealer should be able to fix this for you
Posted on Aug 07, 2009
LOOKING IN CODE BOOK.POSSIBLE CAUSE TO YOUR PROBLEM THE IMRC COULD BE STUCK OPEN.OR THE IMRC ACTUATOR IS DAMAGED OR HAS FAILED.ALSO THE IMRC MONITOR SIGNAL CIRCUIT COULD BE SHORTED TO POWER GROUND OR SHORTED TO SIGNAL GROUND RETURN.
Posted on Oct 23, 2009
Tips for a great answer:
Nov 20, 2016 | 2009 Dodge Journey
Sep 22, 2015 | Dodge Cars & Trucks
Sep 14, 2015 | Ford Cars & Trucks
Jun 30, 2015 | 2003 Ford Mustang
Jun 13, 2014 | 2007 Chrysler Sebring Sedan
Dec 31, 2013 | Cars & Trucks
May 11, 2011 | 2000 Mazda MPV
Dec 26, 2010 | 1997 Ford Econoline
Oct 23, 2009 | 1998 Ford Windstar
Dec 19, 2008 | 2004 Honda Accord
Nov 17, 2017 | Hyundai Cars & Trucks
60 people viewed this question
Usually answered in minutes!