Question about Cars & Trucks

1 Answer

How do u change a parking bulb on a 2006 Chevy Suburbon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

Raise the hood and look behind the headlamp, you should see two flat vertical metal rods with a 90 degree bend at the top. Pull these upward until you can pull the headlight assembly out the front of the vehicle. You should now be able to replace the bulb with no problems. Be sure both the bars lock into place when putting the assembly back in.

Posted on Jul 15, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

n_c_713
  • 20 Answers

SOURCE: Water Pump Leaking

the hardest part of this job is removing your fan clutch. you removed your top fan shroud, then your fan clutch, its reverse thread. take off your belt, upper radiator hose and 6 10mm bolts hold it in. clean water pump housing and put all back together. aftermarket water pumps do not come with theermostat, dealer pumps do. remove your belt tensioner from old water pump 3- 15mm bolt, two different sizes and install on your new pump. you need, 10mm socket, 15mm socket, flat head screw driver, pliers to removed hose,fan clutch tool(rent at autoparts store)

Posted on May 05, 2009

  • 11211 Answers

SOURCE: light bulb for turn signal under mirror 2006 chevy

not bulb led light part of mirror dealer, some auto stores or online parts

Posted on Jan 21, 2010

  • 564 Answers

SOURCE: Trying to remove a power steering pump from a 2006

yes there is near the bottom

Posted on Feb 03, 2010

  • 2 Answers

SOURCE: 2006 Mazda 6 front parking lights

http://forum.mazda6club.com/electrical/135367-changing-194s-headlights.html

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have porche cayenne 2006 with parking lith problem driver rear side turn on rear pasager side note I change bulb still note turn on


What is the problem?
Parking lights are not working? Make sure you installed the right light bulb and placed it tight.

Jan 02, 2015 | 2006 Porsche Cayenne

1 Answer

Helo I have porche cayenne 2006 with problem with parking lith on pasager side I change the bulb but tha still note turn on


Although unlikely, replacing with a bad bulb can send you on a wild goose chase! Check for voltage with a VOM at the socket.
This is a great forum:
How To Replace Parking Lights Inside Headlights 6speedonline com Forums

Jan 02, 2015 | 2006 Porsche Cayenne

1 Answer

I own a 2006 Chevy Impala. My tail lights are not working but my brake lights and turn signals are working. I found the fuse and checked it and it's good. What should I check next?


it sounds like a parking light wire is not connected. look for wire or check the connection, I don't think that both light bulbs would have the lower wattage wire in the bulbs themselves would be burned out.

Sep 15, 2013 | 2006 Chevrolet Impala

1 Answer

2006 chevy malibu


Check your ground wire to lights with DVOM; should read battery voltage from park light terminal of socket to the ground wire. If voltage is low you have a poor ground connection; if not, you may have a bulb/socket shorting across to park lamp ckt.

Sep 13, 2012 | 2006 Chevrolet Chevrolet Malibu

1 Answer

Ant access front parking lights to change bulb


you need to open the bonnet and need to remove the bulbs in the head lights
replace with the new ones the bottom ones are the parking lights so change it correctly dont change the main lights

Feb 11, 2011 | 2006 Suzuki Swift

1 Answer

Light bulb for turn signal under mirror 2006 chevy


not bulb led light part of mirror dealer, some auto stores or online parts

Jan 21, 2010 | 2006 Chevrolet Trailblazer

2 Answers

Replace headlight


Instructions to change a headlight bulb on a chevy colorado or a GMC canyon : Make sure you have plenty of time , if you rush you will have problems so go slow and do it right the first time. > disconnect the parking light connections on the top of the parking lights . > carefully remove the grill by sliding the four plastic tabs on the top of grill while gently pulling , then just pull the grill off being carefull not to pull to hard . there are two snap connectors behind the parking lamps and three more along the bottom of the grill. > with a 10mm socket remove the two bolts that secure the headlights. slide the headlights forward . > this will give you enough room to change the bulb. I removed the connection first. I also put a clean sock on one hand to help handle the bulb without touching the new bulb. trust me on the sock, it helps. > line up the bulb prongs and rotate clockwise until you feel it snap. inspect the new bulb to insure it is properly installed and all three prongs on the bulb are now hidden. double check the bulb though the lens to made sure it is not cocked. >when reinstalling the headlight take a good look first to notice the two tabs on the bottom of the light . the tabs go in first then hold the light up and tight while you reinstall the two 10mm bolts. double check this to make sure both tabs are in . do not overtighten the bolts. check the lights . > use a flashlight to help align the grill push connectors snap in the bottom of the grill first then behind the parking lights then finally snap the four connectors along the top of the grill. > Thats it !!! take your time and you will have no problem. take care , Dave Dave's method might work but I just changed the low beam headlamp bulb on my 2006 Colorado in less than one minute with no tools needed. A simple 1/3 turn of the bulb socket from the back, (to the side of the radiator) and the bulb was out in my hand. Detailed directions came with the 9006 GE Bulb. Ron

Oct 29, 2009 | 2006 Chevrolet Colorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...