Question about 2006 Honda Odyssey
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Posted on Jan 24, 2009
You are probably correct in thinking its the wiper motor. You can do this but you will need to remove all the interior trim from the rear hatch first. Get a trim clip removal tool at a parts store...it will work much better than just a flat blade screwdriver. You'll have to remove the trim panels starting in order from the top of the door, then the left rear window side trim, then right rear window side trim, then the grab handle, and finally the main rear hatch trim panel. Once inside, removing and replacing the rear wiper motor is easy. You'll start by lifting the cover on the wiper arm retention nut. Remove this nut to get the wiper arm off, then remove the nut under neath which is the motor shaft mounting nut. Now, back inside to remove the other 3 motor mounting bolts. Don't forget to disconnect the connector for the motor wires. Reverse steps to replace.
Posted on Apr 06, 2009
I will never understand why this service is so expensive at the dealership.
I made a video showing how this is done: (I would recommend watching the video in HQ and full screen)
Posted on Apr 21, 2009
They have a recall update on torque converter shutter, if update has been installed or problem still exist then the torque converter needs replaced
Posted on Sep 04, 2009
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.
Posted on Nov 22, 2009
Tips for a great answer:
Aug 25, 2016 | 2006 Honda Odyssey
Aug 12, 2015 | Honda Cars & Trucks
Apr 21, 2013 | 2005 Honda Odyssey
Mar 21, 2011 | 2006 Honda Odyssey
Nov 22, 2009 | 2006 Honda Odyssey
Oct 16, 2009 | 2006 Honda Odyssey
Sep 15, 2009 | 2003 Honda Odyssey
Mar 29, 2009 | 2000 Honda Odyssey
Nov 02, 2008 | 2006 Honda Odyssey
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: