Question about Kia Sportage
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: j'ai instaler des freins intégra
You need to bleed the brakes every time you change the brake pads. In order to do this correctly, you need 1 more person with you to press on the brake pedal while you bleed the system, getting rid of the air in the lines is a top priority after a change. And yes, it's a DOT-3 brake fluid.
Posted on Aug 21, 2008
SOURCE: voyant allumée sur le tableau de
Votre unite (sensor) de roue pour le system de freinage a un defectuosite electric cause par la sel et poussiere sur l'unite. Le EPS .... ???
Posted on Jan 10, 2010
SOURCE: Je possède une jetta 1997.
IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
Posted on Aug 16, 2010
SOURCE: j ai un probleme avec
Check the heater flow valve to make sure coolant is actually flowing in and out of the heater core. With the engine at full operating temperature turn the heater control to HOT. Feel the hoses going to the heater core. One hose (Inlet) should be very hot and the other hose (Outlet) should be very warm. If the outlet hose is not warm then you have no flow of coolant. Check the flow valve.
Posted on Oct 16, 2010
Tips for a great answer:
Oct 03, 2013 | Cars & Trucks
Mar 15, 2012 | Audi A4 Cars & Trucks
Jan 08, 2011 | 1989 Ford Ranger
Jan 07, 2011 | Pontiac Grand Am Cars & Trucks
Nov 01, 2010 | Isuzu Amigo Cars & Trucks
Aug 21, 2010 | 2006 Ford Fusion
Jan 10, 2010 | 2001 Volkswagen Golf
Feb 02, 2009 | 1996 BMW 318
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: