Question about Cars & Trucks

Open Question

2006 buick lacrosse glove box lock replace

How do u change out lock for the glove box latch

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Brian032472
  • 150 Answers

SOURCE: How to change the HEPA cabin filter in a 2006 Honda Civic

Open the glove box and there are push out tabs on the left and right side pop them out. Now watch it because you are about to dump the contents of your glove box on the floor. let the box hang freely from the lower hinge and look in the back. You will see a white panel that pulls out the panel has a tray attached with the filter element in it remove old element and replace with new 20ish bucks at the parts store lots more at the dealer. re-install filter tray and reverse your removal steps to re-install. Recommended approx 15k or annually

Posted on Nov 04, 2008

  • 82 Answers

SOURCE: glove box latch broken

The latch is sold seperately. Call your local dealer with the last 9 of you vin number to get the right color. Most dealers sell at the same MSRP price as all the others in town. I know cause I sell these all the time at my Chrysler dealership.

Posted on Jan 08, 2009

  • 1 Answer

SOURCE: replace headlight

how do you remove r/h headlight assembly 2006 lacrosse to install low beam bulb?

Posted on Jan 16, 2010

  • 3 Answers

SOURCE: 2006 buick lacrosse how to replace headlight low

The bright light fitting is the same as the dim so take it apart fist to see how the cover screws off/on and the light comes out. Both the cover and the bulb are removed by a standard twist to the counterclockwise and replaced by a twist to the clockwise. Now to the dim light. You have to release the entire light assembly before you can remove the screw-on cover to reach the light. On the rear edge of the light unit closest to the engine is a white locking tab. Pull that tab up just to the point where it releases…pull too far and it locks again. Next, locate the other locking bracket which is a metal bracket in the center-rear of the light assembly. This bracket is held down by a screw. Remove the screw with a 10mm wrench. Lift the bracket just like you did the white bracket. You should now be able to pull (or pry) the entire light unit forward a little. Depending on the size of your hands this might be enough. If not, then you need to release the plastic bumper assembly to give you a little more space. This is done by removing two expansion locking pins, one that holds the little plastic strip down between the bright and dim lights and one that is located inside a rubber bumper on the engine side of the light unit. To remove these locking pins, pull or pry up the little tab in the center of the pin just like you were pulling a nail by the head. That should give you a little more space.

Posted on Apr 03, 2010

  • 3 Answers

SOURCE: change headlight 2006 Buick LaCrosse

The bright light fitting is the same as the dim so take it apart fist to see how the cover screws off/on and the light comes out. Both the cover and the bulb are removed by a standard twist to the counterclockwise and replaced by a twist to the clockwise. Now to the dim light. You have to release the entire light assembly before you can remove the screw-on cover to reach the light. On the rear edge of the light unit closest to the engine is a white locking tab. Pull that tab up just to the point where it releases…pull too far and it locks again. Next, locate the other locking bracket which is a metal bracket in the center-rear of the light assembly. This bracket is held down by a screw. Remove the screw with a 10mm wrench. Lift the bracket just like you did the white bracket. You should now be able to pull (or pry) the entire light unit forward a little. Depending on the size of your hands this might be enough. If not, then you need to release the plastic bumper assembly to give you a little more space. This is done by removing two expansion locking pins, one that holds the little plastic strip down between the bright and dim lights and one that is located inside a rubber bumper on the engine side of the light unit. To remove these locking pins, pull or pry up the little tab in the center of the pin just like you were pulling a nail by the head. That should give you more space.

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I replace the key lock on glove box latch on a 2008 buick lacrosse?


Well you didnt state year make and model so. im going to give basic idea if you open glove box loo at back side of door there is usually two screws or a clip that you have to remove then pull lock out install new one and either resrew or clip

Mar 14, 2016 | 2008 Buick Lacrosse

1 Answer

The latch of the glove compartment broke. Can't open the compartment


If you look under glove box you will see two to four screws that hold the glove box on. Take out the screws and the glove box will drop down and you can get inside and release latch..then you can get a replacement latch and replace.

Sep 19, 2015 | 1995 Buick Regal

1 Answer

I broke the latch on the glove box. I want to replace the opening mechanism on the glove box door but don't know how to remove the assembly from the glove box door. I need to open the door to retrie


From what I can tell, it looks like u have to remove the whole glovebox door which entails removing the lower dash panel on the passenger side.. That should give u access to screws to remove glovebox door. Don't tug on the door when u remove screw's, just enough space to get ur hand or something else up inside to unlatch.. If u need further info, let me know

Dec 11, 2014 | 2006 Buick LaCrosse

1 Answer

Where is the Power Window fuse on a 2006 Buick Lacrosse.


There is no fuse. The circuit is protected by a breaker. The lower half of the diagram you're seeing is meant to reference that these relays are behind the fuses. A circuit breaker almost never goes bad, though, so your problem is most likely a regulator/motor assembly (if one window is inoperable) or the master switch on the driver's door panel (usually when all windows are inoperable)

Sep 27, 2014 | 2006 Buick LaCrosse

1 Answer

Change turn signal flasher on 2006 Buick LaCrosse


turn signal flasher is usually located, in most vehicles, in or under and in back of the dashboard glove box, or in the area of the fuse box..which could be under the dash on the driver's side, or with the door open.... where the side dashboard meets the door frame on either driver's or passenger side.

Jan 10, 2013 | 2006 Buick LaCrosse

1 Answer

Where is the Radio Amp located in the 2006 Buick Lacrosse CX


likley in your trunk. There might be a removable panel held in place by screws, latches, or velcro

Jan 01, 2013 | 2006 Buick LaCrosse

1 Answer

My mom has a 2006 Buick Lacrosse. The driver's side front door will not open from the outside or inside. Her normal mechanic says they'd have to remove the interior panel, but they'd have to be able to...


Your Mom's mechanic is correct. You need to remove the panel. I'd first try just removing the plastic behind the lock slide if you can and pulling on the control rod it's attached to, just to see if that helps.
To remove the panel you will likely destroy it as that's the only way to get in there. Not a huge problem as there are likely quite a few replacements available at local scrapyards. (best to find one before tearing up the old one). Hopefully, the problem isn't in the latch because you can't remove that without opening or destroying the door. (most times you can make the latch work at least once even if it's broken though) I know you are thinking there must be a better solution, but unfortunately there isn't.
Good Luck!!!!

Mar 19, 2011 | 2006 Buick LaCrosse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...