Question about 1992 Oldsmobile Cutlass Ciera
I own a '92 Olds CC and today when I cut the AC on it would not blow out the vents. It did blow out the "Defroster Vent" but no matter what I did or tried to do I could Not get it to "blow" out of the forward vents. ANY and all help on what to do, what to check, how to possibly clean out the vents, would be greatly appreciated, please. Thank you.
Chances are you lost vac to the control or the blend door under the dash. Most models built before 1999 used engine vac to move the blend doors. You may need a shop manual to get the diagrams to trace the vac lines.
Posted on Jul 14, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ac problems
Sounds like your freon is getting low. Either charge it yourself, which is very easy to do, or take it in for a charge. I have had the same issue with my 98 silhouette.
Posted on Jul 12, 2008
SOURCE: no ac from vents
you may have a vaccum line off under the hood of behind the a/c heater control unit itself i also would like to give you this information its Schram auto & truck parts 1-800-292-1032 and the website is www.schramauto.com if you every have a hard to find part they only sells GM- parts.
Posted on Apr 27, 2009
Anybody can just change parts until the problem goes away. Answer this first: Was the underhood of the car recently serviced? and did this problem appear at that time? Perhaps there is a vacuum line broken or disconnected. The Heat/AC idepends on vacuum to actuate the servos that direct air passage. I know that the control cluster is known to fall apart, but check vacuum lines first.
Posted on May 07, 2009
If you have a late model GM car and the system is controlled electronically the blend door actuator becomes weak. When this situation occurs it will not move the air direction door inside of the heater/air conditioner plenum. in your case not to the vents Replace the actuator with new and recheck the system. i hope this helps
Posted on Jul 24, 2009
Tips for a great answer:
Jul 21, 2016 | 2002 Oldsmobile Intrigue
Jan 07, 2013 | Cars & Trucks
Jun 09, 2011 | 1998 Oldsmobile Intrigue
Jul 17, 2010 | 2001 Volvo S80
Aug 13, 2009 | 1992 Honda Accord
Jul 24, 2009 | 1995 Oldsmobile Cutlass Ciera
145 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: