Question about 2000 Chevrolet Prizm
look under hood engine compartment in the fuse relay box.should find it.
Posted on Jul 14, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
fuel sending unit is in the tank. this is normal after about 75k miles and up. pump and sending unit are sold together. fuel sloshes from front to rear making the float on the sender rise and fall.
Posted on Apr 21, 2009
Check in relay box on passenger side near firewall for fuel pump relay.
By -pass, no such luck that I' aware of, sorry.
Posted on Apr 26, 2009
The Fuel Pump Relay is located in the Glove Box under a little cover on the upper left side. The Fuel Control Relay is the left relay and The Fuel Pump Relay is the right. To test these relays, swap them and then try to start the vehicle, or blow the horn. If the horn blows then use that relay for the pump and you may at least drive the vehicle where needed! If the vehicle starts, then replace them as a pair.
Posted on Apr 27, 2009
Check the cable that goes from your battery to the fuse box the relay that is clicking is on. Check for lose bolts or corrosion of the contacts or something like that. If the relay is clicking it sounds to me like it is a voltage issue going to the relay.
Posted on Oct 06, 2009
Tips for a great answer:
Feb 18, 2013 | Geo Prizm Cars & Trucks
Jan 24, 2011 | 2000 Chevrolet Prizm
Dec 28, 2010 | 2000 Chevrolet Prizm
Dec 28, 2010 | 2001 Chevrolet Prizm
Dec 26, 2010 | 2000 Chevrolet Prizm
Aug 11, 2010 | 2000 Chevrolet Prizm
Oct 18, 2009 | 2000 Chevrolet 3500
Feb 17, 2009 | 2000 Chevrolet Silverado
Feb 10, 2009 | 2000 Chevrolet Prizm
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: