Question about Cars & Trucks

Open Question

Adjust rear brakes 2001 ford laser

How to adjust rear brakes

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: replace rear brakes adjust handbrake

The hand brake hardly ever needs ajusting. See your hand brake mechanincly spreads your rear brake shose inside the drum. Therefore just replace your rear shoes and make sure there ajusted right and you should have no more problems with that part of your car. PS make sure you put some 3M paste on the contact points on your backing plate to avoid a squeak in the near future.

Posted on May 16, 2009

Ad
  • 170 Answers

SOURCE: rear disc brakes 2001 sentra

IF YOU WOUND BACK THE PISTON IT SET AUTOMATICALY

Posted on Aug 31, 2009

MNfisherman
  • 11896 Answers

SOURCE: 2001 dodge neon, rear brakes, how do you install

[PDF] SERVICE MANUAL AUTOMATIC BRAKE ADJUSTERSFile Format: PDF/Adobe Acrobat - View as HTML
s Install the brake adjuster onto the camshaft ... No-Lube™ automatic brake adjusters are manufactured without a grease fitting and are ...
www.lufkin.com/trailers/docs/Haldex_Slacks.pdf

Posted on Sep 29, 2009

harley9701ha
  • 424 Answers

SOURCE: how do you adjust rear brake shoes on a 2001 ford

The rear drum has to be removed to adjust. Remove the dust cap and the attaching nut Adjust the lever ouward to expand the shoes.

Posted on Jan 22, 2010

  • 7 Answers

SOURCE: How do you remove the rear brake drum?

Before you begin make sure your emergency brake is off.

1. Jack up the car and remove rear tires.
2. With a 13mm socket and ratchet remove the 4 bolts that are on the back of the hub assembly. (You will need an extension and a universal joint adapter)
3. Pull the drum off and the spindle will come off with it, giving you access to the shoes, wheel cylinder, hold down hardware, etc... (you may need to adjust your brake shoes so the drum will slide off easier.)

Do not undo the nut in the middle of the drum (under the dust cap) unless you absolutely need to turn the drum or replace the drum as the threads on the spindle are known to strip very easily. Should you need to take it off the socket for the spindle nut is a 30mm.

Posted on Feb 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you adjust the rear drum breaks on a 1990 Ford Laser Hatchback


to adjust the brakes --- at the bottom of the drum housing ( twords the inside of the car ) there should be a little oblong rubber cover. pop that cover off and you will see a gear looking wheel adjuster,, using a flathead screw driver rotate the wheel -- in one direction it will advance the shoes and in the other direction it will decrease the shoes. make sure the parking brake is off while you make the adjustment -- also make sure the side you are working on is jacked up off the ground so you can spin the wheel / hub to get the brake shoes in the right position. you should not hear any rubbing of the brakes as the drum spins. -- I find it best to turn the gear adjuster just to the point where the shoes start to grab,, then back off a couple clicks --- repeat on the other side and you should be good to go. hope this helps --

c...

Dec 30, 2010 | Ford Laser Cars & Trucks

1 Answer

How do you adjust rear brake shoes on a 2001 ford focus.


The rear drum has to be removed to adjust. Remove the dust cap and the attaching nut Adjust the lever ouward to expand the shoes.

Jan 22, 2010 | 2001 Ford Focus

2 Answers

I need a diagram for the rear drum brake for 2002 Ford Ranger


Copy and paste this into your search window: 2002 ford ranger rear brake diagram

You should see four pictures pop up, select the brake parts diagram or the brake picture.

Sep 03, 2009 | 1993 Ford F150 SuperCab

3 Answers

Got a weak brake pedal after a rear blake job


it sounds like the portion valve is stuck

Aug 14, 2009 | 2001 Ford Super Duty F 450

1 Answer

Any adjustment on e/brake


the only adjustment on the e brake is to make sure that your rear brakes are adjusted properly. If the rear brakes are adjusted too lose the the e brake will not work properly.

Aug 03, 2009 | 2001 Ford Explorer

1 Answer

Replace rear brakes adjust handbrake


The hand brake hardly ever needs ajusting. See your hand brake mechanincly spreads your rear brake shose inside the drum. Therefore just replace your rear shoes and make sure there ajusted right and you should have no more problems with that part of your car. PS make sure you put some 3M paste on the contact points on your backing plate to avoid a squeak in the near future.

May 16, 2009 | 2001 Ford Focus

1 Answer

Rear lights stays on when all other light are off 2001 ford taursus


When this Happens, have someone watch the rear lights, and YOU Go in and GRAB the BRAKE PEDAL and PULL UP ON IT,
DO they go off ? if so the Problem IS Brake Light Switch ADJUSTMENT---- The Switch Needs to be CLOSER to the PEDAL ARM ,So ADJUST IT that wah BY Carefuly PUSHING "DOWN" on the Switch untill you get the desired Adjustment.
If by Chance this DOES NOT do the trick Please Dont Count me out yet Write Back with detail.

Apr 18, 2009 | 1998 Ford Windstar

1 Answer

2000 ford f-450


e is a cable under the car that runs from under the driverside firewall towards the rear where it splits to each rear wheel at the split there is a threaded sleeve turn it till it pulls the cable tight but be careful it isnt to tight. if that does not solve it the cable nneds to be replaced or the rear brakes need adjusted or replaced I would visually check the brakes on the rear 1st. most times the brakes are worn out which is why the E-Brake seems out of adjustment.

Oct 31, 2008 | 2001 Ford Super Duty F 450

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...