Question about 1994 Oldsmobile Bravada

1 Answer

Instrument cluster I have a 1994 Oldsmobile Bravada. The dashboard panel is not fully lighting up. I don't see my turn signals, although I do know they work, and the speedometer does not show either. This has been and on/off thing for past couple of weeks. The turn signals on the truck work but I can't see them on the panel. All other indicators work (gas gauge, oil gauge, ABS-which isn't working), therm and battery). The tach and mileage indicators also work.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,720 Answers

Do an online search for speedometer repair places. You can get yours rebuilt for a fraction of the price of new or junkyard

Posted on Jul 02, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
mackinbeats
  • 46 Answers

SOURCE: Speedometer and Tachometer not working

check the vehicle speed sensor located on the transmission housing.

Posted on Apr 11, 2009

  • 3 Answers

SOURCE: 1994 bravada with digital dash fuel gauge not working

Drop the column. On top of the column at approximately 12 o'clock there are two plugs - 1 blk, 1 wht. blk one has 2 wires, 1 red, 1 orange - red is hot from ignition, orange is constant power. make sure the orange is in socket tight and wire is not broken. getting it in tight should fix your problem.

Posted on Apr 24, 2009

c17hydro
  • 2984 Answers

SOURCE: i have an 1983 olds cutlass and the guage cluster

Worn out gauges would be the first guess. The next would be the oil pressure sensor....

The gas gauge could have problems from a bad float in the gas tank or the wires to the sending unit are badly deteriorated.

Posted on Dec 01, 2009

csmock132
  • 4669 Answers

SOURCE: My 1994 oldsmobile Achieva's turn signals stoped working

Have you checked the turn signal fuse? If it is good then i would replace the flasher.

Posted on Apr 11, 2010

redds55
  • 2620 Answers

SOURCE: Speedometer, gas gauge, rpm, all not working while

These instrument clusters are known to be faulty.Replace cluster

Posted on May 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instrument cluster gauges


Check engine light ,abs , air bag lights etc.... come on when key turned on ?
Fuse IPC/HVAC BATT 10 amp located in the left IP junction block . Do you know where this junction box is ?
Does the heater an A/C work ? If so the fuse isn't the problem .
Speedometer
The speedometer is a road indicator. The vehicle speed sensor (VSS) is a permanent magnet generator which is located on the transaxle. The VSS sends an input to the PCM whenever the transaxle differential carrier turns. The PCM then buffers the VSS signal. The PCM transmits the VSS signal to the following components at 4000 pulses/mile through CKT 817:
• The instrument cluster
• The cruise control module
• The radio (uplevel)
The instrument cluster uses the input in order to indicate the vehicle speed on the speedometer.
Instrument Cluster Indicators
The BCM controls the instrument cluster indicators through the SPI serial data communication bus. Refer to Body Control Module System Check in Body Control System.

IPC/BFC ACC
10A
Instrument Cluster and Body Control Module (BCM)
IPC/HVAC BATT
10A
Instrument Cluster and Heater A/C Control Assembly

Jul 24, 2017 | 1998 Oldsmobile Cutlass

1 Answer

Instrument cluster


Cold solder joints were a common problem with GMC instrument panels of that time. I've found surface mount resistors just rolling around inside panels with some just plan gone. If so you can get a panel from junk yard remove parts from that & fix yours. Removal & repair is not all that hard.

Jul 14, 2013 | 1994 Oldsmobile Bravada

1 Answer

My dashboard and rear lights don't work


Assuming this has the V6, the 15A PARK LPS fuse in the underhood fuse block feeds constant power to the auto park lamp relay. When the relay closes, 12V power passes through the 10A INST LPS fuse in the right instrument panel fuse block to the panel dimmer switch and then to the five instrument cluster lamps.

If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block, passes through the automatic lamp control (ALC) relay and the right instrument panel junction block to the tail filament of the dual stop/tail lamp and the separate tail lamp on each side. The 12 V power for the stop lamps is protected by the 20A STOPLAMPS fuse in the left I/P junction block, passes through the stoplamp switch when brakes are applied, stop filament of the dual stop/tail lamps. That leaves the turn signals and the hazard lamps. Power for the turn signals originates at the 10A TURNLAMPS fuse in the left I/P junction block and is applied to the hazard switch. Switch output goes to the turn/headlamp/wiper switch for selection of left or right turn signals. That switch output goes to the turn lamp. Power for the hazard function begins at the 10A HAZRD LPS fuse in the left I/P junction box and goes to the hazard switch. Switch output is sent to the left I/P junction box to make the turn signals flash. That's it. Post a comment if you need more information.

Sep 15, 2012 | 2002 Oldsmobile Alero

2 Answers

2004 Bravada instrument panel lights are out


Have you tried the dash light dimmer control

Nov 01, 2017 | 2004 Oldsmobile Bravada

1 Answer

Dashboard lights do not come on !


check the cluster dimmer switch make sure not turned all the way down to keep instrument cluster lights from glowing brightly.if dimmer switch not turned way down look for blowed instrument cluster fuse.

Dec 03, 2011 | 2006 Hyundai Sonata

1 Answer

Hello i took off my cluster on my 02 sebring and i have everything apart i want to know which bulb do i replace for my dash lights to work


If you have it all apart, I would replace all of them so you don't have to take it all apart again! Bulbs fail close to each other.

But not the error warning signal lights.

Generally the dashboard lights for the instrument cluster are directly above and below the cluster.

Aug 28, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

Instrument panel on 1994 Bravada comes on and off. If you smack the side sometimes it will come on so I know it's not the bulbs. I took off the panel and the connectors are all clean but there's...


BAD GROUND- caused by moisture in cabin- corroding the GROUND terminal /strap/connector. Check the connectors up to the panel? YUP. Tear apart dash. GOOD LUCK!!

Aug 09, 2011 | 1994 Oldsmobile Bravada

1 Answer

I have a fully loaded Trofeo. The dash lights won't work and it doesn't appear to be any fuses. The headlights have the auto sensing for darkness and auto on and I believe the instrument panel lights are...


To the left of the panel there is a little button that will move vertically. push that all the way up, just before it clicks (the click will turn all interior lights on). If that doesn't work there is a fuse in the glove compartment. i don't have my manual on me but there is a cluster that has instrument panel lighting on it. it usually says IP cluster or something. or have a mechanic go into service mode. I could tell you how to do that but it's kind of confusing without showing you

Feb 05, 2011 | 1992 Oldsmobile Toronado

1 Answer

Instrument panel electronic cluster will not light


The power supply within the digital gauge cluster usually goes bad in them. You can either buy a repair kit on ebay or buy a new one

Nov 09, 2009 | 1994 Oldsmobile Bravada

1 Answer

Dashboard Instrument cluster does not work.


there are 2 large terminal plugs with the wiring for all the instruments that are plugged into the back of that panel. make sure they are snug and in place. You reach in and under but it may easier to "simply" remove the cluster. 4 screws hold it in place accessible form underneath and with a long phillips screwdriver and lighting.

Aug 26, 2009 | 1994 Jaguar XJ6

Not finding what you are looking for?
1994 Oldsmobile Bravada Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...