Question about Cars & Trucks

Open Question

Ford Windstar door panel removal

How to remove passenger side interior door panel to repair door lock

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1986 Answers

SOURCE: how do I remove interior front door panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then just remove the bolts for the mirror

Posted on Aug 14, 2009

Ad
  • 1986 Answers

SOURCE: 2003 ford thunderbird how do you remove inner door panel?

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 1986 Answers

SOURCE: How remove the door panel?

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 1986 Answers

SOURCE: How do I remove the passenger side interior rear

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to everything.

Posted on Sep 18, 2009

  • 1986 Answers

SOURCE: need to remove inner rear passenger side door

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace passenger door side mirror 2012 ford flex


The related help links are mentioned below.Click the link below:---
---------How to remove rear view mirror metal foot?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-rear-view-mirror-metal.html


----------

power locks, power window and power mirror on the passenger side not working on Ford Windstar
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html


----How to Remove Outside Mirrors on Acura Integra?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-outside-mirrors-on-acura.html


-------Passenger side Folding Mirror is not operating? http://schematicsdiagram.blogspot.com/2011/12/passenger-side-folding-mirror-is-not.html

--------
These will help.
Thanks.



Nov 18, 2012 | 2012 Ford Flex SE Wagon 3.5L V6 6-speed...

1 Answer

Problem with dual zone heating only one side i check control thermost botton is ok


Sounds like the blend door actuator. It separates the driver and passenger side from getting air on the AZC system. Here are some instructions on replacing it:
The passenger side blend door actuator is used on all models equipped with Automatic Zone Control (AZC). This actuator is located on the front of the HVAC housing to the right of the floor panel transmission tunnel and cannot be removed from the passenger compartment without instrument panel or HVAC housing removal.

NOTE: This procedure is for AZC Systems (Passenger side only).

  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box door. See: Body and Frame\Interior Moulding / Trim
  3. Remove the lower I/P glove box door surround panel.
  4. Remove the dash assembly. See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Assembly
  5. Remove the HVAC assembly. See: Housing Assembly HVAC\Service and Repair
  6. Unplug the wire harness connector from the blend door actuator.
  7. Remove the 2 screws that secure the blend door actuator to the HVAC housing.
  8. Remove the blend door actuator from the HVAC housing.
INSTALLATION - AZC (Passenger side only)


  1. In stall the blend door actuator on the HVAC housing and tighten the two mounting screws to 2.2 Nm (20 in. lbs.).
  2. Plug in the wire harness connector to the blend door actuator.
  3. In stall the HVAC unit into the vehicle. See: Housing Assembly HVAC\Service and Repair
  4. Install the instrument panel assembly into the vehicle. See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Assembly
  5. Evacuate the HVAC system.
  6. Recharge the HVAC system.
  7. Connect and the battery negative cable.
Hope it helps! If you need more, just send me an email at familyguy77351 at yah I wil be glad to finish helping you with more detail.

Dec 12, 2010 | 2000 Jeep Grand Cherokee

1 Answer

How do I remove the side sliding door from a 1998 Ford Windstar?


To prevent damage to the vehicle, two people should perform this procedure.

  1. Remove the interior trim panel.

  2. Remove the bolt attaching the lower guide bracket and roller.

  3. Remove the bolt attaching upper guide bracket and roller.

  4. Remove the guide bracket and roller from the door.

  5. Remove the hinge from the door.

  6. Remove the door from the vehicle.

To install:

  1. Position the door on the vehicle.

  2. Install the hinge from the door.

  3. Install the guide bracket and roller on the door.

  4. Install the bolt attaching upper guide bracket and roller.

  5. Install the bolt attaching the lower guide bracket and roller.

  6. Tighten bolts to 89-124 inch lbs. (10-14 Nm).

  7. Install the interior trim panel.

Oct 22, 2010 | Ford Windstar Cars & Trucks

1 Answer

I have a ford focus w reg, my passenger door won't open. I can't lock the doors using remote because it only locks three doors, i have to lock the passenger door manually. but now after locking the...


You will probably need assistance with the repair, but first try this. Spray some spray lubricant like WD40 into the keyhole on the exterior using the tiny straw provided with the lubricant can. Try locking and unlocking manually using your key in the outside key lock and try activating the handle to open the door while you have someone pull in and out on the door. Once it's open, you may need to remove the interior panel to see if something is rusted, worn or bent.

Aug 10, 2010 | 2000 Ford Focus

2 Answers

Problem with door locks on 2000 Ford Windstar. You can hear the locks trying to work but only the driver's side door and passenger side sliding door is working.


You need to get a can of penetrating spray (WD-40) or similar, and spray inside the lock/latch mechanisms. Use the little red nozzle and make sure you get in behind it, down the side etc, to loosen up linkages. It may take a little work, and a couple of sprays, but keep working them manually until they free up, then start using power locks as well. Once they are working good, get a spray can of white lithium grease or similar, and give them a coat of that as well, sprayed all over the backside, and down the sides as well, to prevent/deter same happening again.

Feb 20, 2010 | 2000 Ford Windstar

1 Answer

My windstar vans side door on the driver side is stuck in teh lock position. the door is not shut all the way but I can't unlock it. I've tried to pull the lock up but it won't budge. please help


Try to close the door fully by pushing it forward (may require several hands pushing at once) which may reset the lock and latch. If it closes, but still doesn't release the lock, the interior panel must be removed to access the lock and latch directly.

Nov 03, 2009 | 1999 Ford Windstar

1 Answer

1996 ford probe passenger electric window no longer works.


you blew the fuse for your radio.you cannot put a hot wire to a ground that is why the fuse blew.you could have broken a wire connector for the door,windows etc.the headlight switch wire harness is probably melted this happens a lot on Ford products,the head light draw so much heat they melt the wire harness plug that goes on the back of the headlight switch.

Jul 25, 2009 | 1996 Ford Probe

1 Answer

1998 Ford Windstar fuse problem - dome light stays on etc


you most likely have a bad door ajar switch- the door panel has to be removed to access it, its on the door latch- you can unplug them this will take care of the batt drain prob.as for the locks it may be a switch problem- most ford vehicles will not let you lock the vehicle from the driver's door when it's open to prevent locking the keys in.

May 26, 2009 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...