Question about Cars & Trucks

Open Question

How to fix blend door on a 2000 dodge dakota - Cars & Trucks

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1118 Answers

SOURCE: 2000 dakota heater swich

heater blower motor resister bad. replace with new.

Posted on Jan 29, 2009

  • 27 Answers

SOURCE: location of the thermostat on a 2000 dodge dakota 3.9l v6 located

right in front on top of motor follow your top rattior hose to the motor

Posted on May 31, 2009

  • 5763 Answers

SOURCE: What are the proceedures to R&R ablend door

its pretty simple remove 2 or 3 screws unplug it and remove,

Posted on Nov 02, 2009

  • 149 Answers

SOURCE: Where is the air temp control blend door and is it

You will have to remove the glove box door and then the inside liner. It will be behind it.

Posted on Jan 03, 2010

Testimonial: "Thank you - I will check that out in the morning"

  • 4339 Answers

SOURCE: How to replace a Blend

Blend door mixes hot and cold, not a distribution control. Look for loose or dislodged vac lines... Heater designed to fail in defrost mode.

Posted on Sep 06, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Trying to figure out the required positioning of the blend doors in a 2007 dodge dakota

Does it have an electric control actuator ? An it's mode door not blend door . Mode door controls where air comes out of , defroster , vent , floor etc... an the blend door controls the temp. Pull the mode door actuator an see if the door move's freely , not binding . After replacing an evaporator if everything was put back right you shouldn't have this kind of problem . There is no relearn for the door actuator . Double check your work is the best answer anyone could give !

Jul 30, 2016 | 2007 Dodge Dakota Quad

1 Answer

How to fix 2000 dodge dakota air and heat blend motor?

Hi Sharon, I'm glad to help. The 2000 Dakota came with a cable operated Temperature Door and some times the door would get out of adjustment or break. You need to remove the radio so you can see the cable, then move the temperature slider on the control head while watching the cable if it doesn't move then you'll either need a new cable or its came loose somewhere. Check both ends of the cable and make sure they are attached. Hope this helps and have an awesome day Sharon.

May 14, 2014 | Dodge Dakota Cars & Trucks

1 Answer

Blend door location

I am trying to locate the ac blend door actuator on my 2000 cadillac seville sts: AC blows air on the floor only instead of the dash board ac vents. Appreciate any help

Jan 04, 2014 | 2005 Dodge Dakota

1 Answer

Air condition there is cold air coming out and the fan is new but there is no force air just alittle

Could be a blend door problem or a restricted cabin air filter if equipped.
The blend door directs air to the vents.

Jul 20, 2012 | 2001 Dodge Dakota

1 Answer

Where is the air temp control blend door and is it hard to get to on a 1998 dodge dakota

You will have to remove the glove box door and then the inside liner. It will be behind it.

Jan 02, 2010 | 1998 Dodge Dakota

1 Answer

What are the proceedures to R&R ablend door

its pretty simple remove 2 or 3 screws unplug it and remove,

Nov 02, 2009 | 2005 Dodge Dakota

1 Answer

My drivers side window fell into the door on my 2000 dodge dakota 4 door. Can I fix it myself?

You should be able to fix it yourself by carefully taking the inside of the door off. If you have power windows, your window actuator has gone bad which happens often in Chrysler vehicles, and will need to be replaced. Until you get your hands on the actuator, you can jam a piece of paper or cardboard in, to keep the window up. Good luck and thanks for using FixYa!

Jun 27, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

Heater problem

you may have a vacum leak under the hood or dash. you may find this usually isnt that hard to fix. also look under the dash and try to find the blend door. move it to heat with your hand and see if you have heat then. good luck .

Nov 09, 2008 | 1997 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides