Question about 2004 Acura MDX

Open Question

Replace headlight assembly 2005 acura mdx

Is it easy replace a headlight assembly on acura mdx 2005

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: trying to replace a front headlight bulb on 2001 acura 3.2 TL

Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.

btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and the ignitor. The bulbs usually start to loose their color long before they burn out. The inverters/ballasts either go out after a while or take a while to start up.

Before you spend money on a new bulb, try swapping it with the one on the other side. You'll need a security torx screwdriver to get the covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.

If the problem stays on that side, try swapping the ignitors. They're mounted inside the black covers.

If the problem is still on that side you've got a bad inverter. They're mounted on the bottom of the headlight assembly. You'll need to remove the front bumper and remove the headlight assembly to get to it. (I recommend you take pictures as you remove things so can put them back together correctly.)

Posted on Jan 05, 2009

Ad
  • 12 Answers

SOURCE: How do I replace my 2003 Acura TL passenger headlight assembly?

You will have to remove the front bumper to get to the bolts that hold the head light on
I would not recommend you try this unless you have some experience with this type of work

Posted on Mar 13, 2009

  • 1 Answer

SOURCE: How to use TPMS in Acura MDX 2005

The TPMS light will be visible in your instrument panel like your parking brake would if activated. The TPMS function is activated automatically once any of your tires are improperly inflated. Furthermore, it will identify which tire needs attention.

Posted on Mar 14, 2009

  • 1986 Answers

SOURCE: Headlights

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Sep 30, 2009

co7196
  • 3433 Answers

SOURCE: 2006 Acura MDX bluetooth stopped

Bluetooths have batteries, Rechargeable. If it won't hold a charge replace the batt.

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and replace 2006 acura mdx tour headlight assembly


head lights are held in with torqx screws or clips inside the engine compartment

Feb 02, 2015 | 2006 Acura MDX

2 Answers

2005 Acura mdx passenger side headlight out, bulb ok, fuse ok, what next


Check for power and ground at the headlight plug. Test lights are cheap.

Oct 17, 2014 | 2005 Acura MDX

1 Answer

How do I get ACURA 2005 mdx SERVICE MANUAL


Hello, your manuals are available online here. http://www.automanualonline.com/base/acura/mdx/2005/

Mar 07, 2011 | 2005 Acura MDX

1 Answer

Does the 2005 acura mdx have timing belt or chain?


the 2005 Acura MDX has a timing belt for sure...

Oct 09, 2010 | 2005 Acura MDX

1 Answer

Acura mdx 2005


30000 miles.the owners manual will tell you exactly.most honda are 48000 km,exception is the cvt type transmission which there is no service done.

May 26, 2009 | 2005 Acura MDX

1 Answer

Change cabin air filter in 2006 Acura MDX


You cut the cross bar away with some diagonals and throw it away. It is just an assembly aid when they are putting the car together. Google "DIY MDX cabin air filter" and you will find step by step procedures with photos for changing the filter. It is not a difficult job.

Mar 16, 2009 | 2005 Acura MDX

1 Answer

Headlights


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Aug 01, 2008 | 2005 Acura MDX

Not finding what you are looking for?
2004 Acura MDX Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...