Question about Mitsubishi Colt

Open Question

How Fit Clutch on colt 2.8 pioneer

Want to know step by step to fit a clutch on a colt 2.8 TDi.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 60 Answers

SOURCE: will an M3 e46 clutch fit my 2000 323ci bemmer

yes it will fit i have done it , if you wont to be sure get the diameter of the friction part and go to a automotive suply shop and get them to look in ther guide and it will have yor clitch size diameter

Posted on May 06, 2009

Ad
co7196
  • 3433 Answers

SOURCE: how do i fit a clutch

It's easier to do than explain and would take around 2-2.5 hrs.if rear wheel drive. Front wheel drive about 3 hrs.tell me what you have. What area do you live?

Posted on May 09, 2009

bunnydawg
  • 5158 Answers

SOURCE: Clutch Size

go to www.rockauto.com give it the information you want and it will let you know if it's interchangable.

Robert

Please take a moment to rate this solution thanks

Posted on May 24, 2009

  • 299 Answers

SOURCE: how do i fit a clutch on a ford escot

www.autozone.com

Posted on Sep 25, 2009

  • 4349 Answers

SOURCE: Is it hard to fit Ford focus 1.8 tdi 03 plate?

Well, not necessarily hard, but pretty complicated. Trans has to come out, and it is harder than in the olden days.... Be sure to also resurface the flywheel, replace all seals that you encounter, replace the release bearing and pilot bearing.

Remember to align the clutch plate with a dummy imput shart....

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, i have a Tata indica 1.4 baseline 2007-model (manual gearbox). I put car in reverse and made a scratching sound. Now i can't get any other gears (1-5) besides reverse. What could be the problem? I


I do not know what your mechanic was thinking to do it that way. vehicle manufacturers do not make clutch parts so the clutch would have been made by a company that makes all the clutches to specs. Just because it was not in a TATA parts box doesn't mean that it couldn't be matched up size wise to a generic kit.
What ever has happened is because of the mechanic's modification and the way he fitted it.

Dec 19, 2014 | 2007 Tata Indica LEi

1 Answer

How do you adjust the clutch on a 2000 golf se tdi 1.9


Renew the clutch cable its a auto adjust mechanism and the cable comes with a plastic tie around the middle bit so fit the cable and then and only then remove the tie ,this is a difficult job and not easy for a weekend mechanic so be warned

Mar 01, 2014 | Cars & Trucks

1 Answer

Steps to Replacing a Clutch on mitsubishi express


for the full steps then get a workshop manual as there are some details that will be missed . Basically it is Remove the battery terminal. remove the rear drive shaft ( front also if 4wd). Remove the gear lever at the tower bolts on the gear box. Drain the gear box or be prepaired for the gear oil to run out the end of the transmission when you pull the box. . Place a bottle jack under the sump at the rear of the engine . Place a trolley jack under the gear box. undo the rear transmission mount cross member Undo all the bell housing bolts. lower the jack and the trolley jack and pull the gear box back. Undo the bolts holding the pressure plate on the flywheel a bit each at a time as you go around the plate . Remove the plate and the clutch plate ( be aware that the clutch plate will only go back in one way so watch the way the clutch hub was facing. Remove and replace the bearing in the back of the crank shaft. clean up the flywheel face ( good idea for a good non shudder job is to have the flywheel re-machined ) fit the clutch plate the right way and fit the pressure plate . Use a clutch aligner tool as it will be impossible to fit the gear box with out it. Replace the clutch throw out bearing. Now re install using the reverse processes As I said a manual shows it all

Dec 14, 2013 | Cars & Trucks

1 Answer

Clutch installation


Genewrally speaking you need to remove the gear box. UNdo the bolts holding the clutch pressure plate on the flywheel. . Do this by undoing each bolt a few turns at a time. Remove pressure plate and clutch plate. Clean flywheel face. Remove bearing at center of crankshaft and replace as it will be dry and probably rusty. Fit new clutch plate taking care to observe the correct way the plate is fitted. Normally the raised hub section faces away from the flywheel. THis can be checked by pressing the plate against the flywheel and turning it and it it hits the crank bolts you have it in the wrong way round. Fit the pressure plate over the plate and insert the bolts. Some units have 2 or 4 bolts longer than the restand this is to allow the plate to be depressed a fraction to allow the other bolts to screw in. Place a clutch aligning tool through the clutch plate and into the bearing. Evenly retension the pressure plate bolts going alternately across the cover a bit at a time . When retensioned remove the clutch aligning tool. Remove and replace the throw out bearing on the clutch release forks. Ensure that the clutch kit is all new as mixing parts will not work. Refit the gear box. Basically that is the proceedure but to be exact get the manual for your vehicle to cover any extra steps needed for that vehicle.

Mar 07, 2013 | Ford Transit Connect Cars & Trucks

1 Answer

I need to know how to replace the clutch in a 1993 colt vista


0900c1528004723e.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Clutch release bearing - 1990 Colt hatchback and sedan w/ 1.6L engine, 1990 Colt Wagon w/1.8L engine, and 1990-93 Vista


0900c1528004723f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Clutch driven and drive discs - 1990-93 all models


0900c15280047240.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Clutch release bearing - 1990 Colt Wagon w/1.5L engine, 1991-92 Colt hatchback and sedan w/4-speed and 1993 Colt hatchback and sedan w/1.8L engine

  1. Remove the transmission or transaxle as outlined.
  2. Insert a pilot shaft or an old input shaft into the center of the clutch disc, pressure plate, and the pilot bearing in the crankshaft.
  3. With the pilot tool supporting the clutch disc, loosen the pressure plate bolts gradually and in a crisscross pattern.
  4. Remove the pressure plate and clutch disc.
  5. Clean the transmission and clutch housing. Clean the flywheel surface with a non-oil based solvent. Wash your hands before installing or handling the clutch assembly parts. Hold the clutch disc by the center hub only.

Before assembly, slide the clutch disc up and down on the transmission input shaft to check for any binding. Remove any rough spots with crocus cloth and then lightly coat the shaft with Lubriplate.
  1. To remove the throwout bearing assembly: Remove the return clip and take out the throwout bearing carrier and the bearing.
  2. To replace the throwout arm use a / 16 in. punch, knock out the throwout shaft spring pin and remove the shaft, springs, and the center lever.
  3. Do not immerse the throwout bearing in solvent; it is permanently lubricated. Blow and wipe it clean. Check the bearing for wear, deterioration, or burning. Replace the bearing if there is any question about its condition.
  4. Check the shafts, lever, and springs for wear and defects. Replace them if necessary.
  5. If you hadn't planned on replacing the clutch disc, examine it for the following before reusing it. Loose rivets. Burned facing. Oil or grease on the facing. Less than 0.3mm left between the rivet head and the top of the facing.
  6. Check the pressure plate and replace it if any of the following conditions exist: Scored or excessively worn. Bent or distorted diaphragm spring. Loose rivets.
  7. Insert the control lever into the clutch housing. Install the two return springs and the throwout shaft.
  8. Lock the shift lever to the shaft with the spring pin.
  9. Fill the shaft oil seal with multipurpose grease.
  10. Install the throwout bearing carrier and the bearing. Install the return clip.
  11. Grease the carrier groove and inner surface.
  12. Lightly grease the clutch disc splines.

The clutch is installed with the larger boss facing the transmission.
  1. Support the clutch disc and pressure plate with the pilot tool.
  2. Turn the pressure plate so that its balance mark aligns with the notch in the flywheel.
  3. Install the pressure plate-to-flywheel bolts head-tight. Using a torque wrench and, working in a crisscross pattern, tighten the bolts to 11-15 ft. lbs.
  4. Install the transmission or transaxle as outlined.
  5. Adjust the clutch as described in the following information.

Jan 07, 2013 | Cars & Trucks

1 Answer

2003 jetta gl manual trans-positive battery and ground starter cables replaced...now have plenty of juice going to starter...but it grinds when i turn the ignition...now it doesn't start at...


I presume you mean 'grinds when I turn the ignition..(to start)'.
If this is so, it's most likely the starter motor 'drive (overun) clutch is faulty.

Either replace the starter motor complete or replace the drive clutch assy on the original.
The latter should be cheaper (especially if you can source a new 'drive clutch' and fit it yourself).

Nov 13, 2009 | 2003 Volkswagen Jetta TDI

1 Answer

Is it hard to fit Ford focus 1.8 tdi 03 plate?


Well, not necessarily hard, but pretty complicated. Trans has to come out, and it is harder than in the olden days.... Be sure to also resurface the flywheel, replace all seals that you encounter, replace the release bearing and pilot bearing.

Remember to align the clutch plate with a dummy imput shart....

Oct 05, 2009 | 2003 Ford Focus

2 Answers

I need to know how to replace a clutch on a 1989 4 runner toyota pickup 6 cylinder engine


2Ways 1 take the Engine out and fit the new clutch if you have a block and tackel or crane to lift it.
2nd Jack up truck as high as possible and fit stands under,, Rmove gear levers/tail shafts/ transfer box and all other parts before removeing X member on box/ and put jack under engine/before removing all bell housing bolts and starter motor..remove box assy.. fit new clutch, refit box etc in reverse of removal.. But engine out is the BEST WAY

Oct 02, 2009 | 1989 Toyota Pickup SR5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...