Question about Cars & Trucks
My door strap on passenger door has fully snapped, is it easy to replace myself? 97 Hyundai Lantra
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i,ve got a problem
try pushing the clutch to the floor with you toes if it starts and won't unless you push to the floor its the clutch start switch 22 bucks at auto zone i will be gettng help installing the new one i will let you know.
Posted on Nov 02, 2008
pop the door panel loose near the door lock actuator is at top of door;break the cover off of the door lock actuator.manually turn the actuator worm gear out of double lock with a screwdriver and pull the inside handle; not the easiest thing to do...good luck
Posted on May 02, 2009
You can actually do it from the top if it is similar to a 2001 Elantra??? On your right center of the tranny, there should be two big bolts I believe a 17mm one on the bottom left the other top right of the other. The bottom left is the drain plug the top right is where you fill it. If you want to make things easier you can remove the air cleaner and the air cleaner housing then unscrew the sensor on top of the tranny you can poor it in from the top. You will need to then unscrew the fill hole (Top right bolt) Pour the lube in to the hole where you had taken out the sensor until it pours out of the fill hole. Sounds like more work but by doing this you will avoid making a mess trying to fit the squeeze bottle into the tiny hole. Hope this makes Sense????
Posted on May 17, 2009
They use throw away bolts. One use only, so don't reuse your old ones. You will need new ones. The smaller bolts 1st torque setting 22Ft/Lbs and the larger 26ft/lbs, the 2nd torque setting 60 degrees both bolt sizes and the 60 degrees for the third.
Posted on May 24, 2009
Tips for a great answer:
Jul 10, 2014 | 1997 Hyundai Elantra
Jun 04, 2009 | Hyundai Motor 1994 Elantra
May 20, 2009 | 1997 Hyundai Elantra
Feb 21, 2009 | 1997 Hyundai Elantra
Jan 23, 2009 | 2000 Hyundai Elantra
Dec 09, 2008 | 1998 Hyundai Elantra
Oct 08, 2008 | 1995 Hyundai Elantra
Aug 24, 2008 | 1993 Hyundai Elantra
24 people viewed this question
Usually answered in minutes!