Question about Cars & Trucks
If it has a nut on the arm where it connects, remove the nut and hit down on the arm where the elbow joins and it should come free, don't hit too hard tho
Posted on Jul 14, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Windshield Wiper Arm
Pull up on the wiper arm, you will see a tiny little blade on the side of the wiper arm where it goes over the post, take a little screwdriver and pry that out board, this will release the arm from the post, it will be tight, wiggle the arm and pull straight out away from the post.
Posted on Oct 19, 2008
My dad helped me solve this problem on my truck...
They simply pry off. He put down a towel to protect the cowl grill, took a hammer (using the split end) and pried them right off.
There was no mechanism holding them on, when we were done working under the grill, we used the same towel, but the other side of the hammer to stick 'em back on.
Posted on Mar 30, 2009
pull off the guard shield at the base of the wiper arm and a nut should be exposed remove the nut if one there and it should pull off if neither is present pull the arm upwards and with a tiny pin fit into the hole causing the wiper arm to stay up and out and simply lift it off
Posted on Sep 15, 2009
The windshield wiper linkage comes as an assembly. The assembly comes with the two rotating splines that the wiper arms attach to. you must remove wiper arms. Remove cowl trim and remove bolts that hold the pivot points to the body. The new linkage that snaps to the wiper motor should come with a new retaining clip. You have to fish the linkage assembly through the access holes in the body by un bolting the wiper motor.
Posted on Dec 19, 2009
The wiper arms have a push in tab at the very bottom at the fitting that is pressed into the wiper linkage below the screen. Use a flat headed screwdriver to pry out the tab. Once out the arm can be pulled right off. Now you can remove the cowling screen
Posted on Apr 07, 2010
Tips for a great answer:
Nov 27, 2012 | 1996 Dodge Ram
Oct 08, 2012 | 2010 Dodge Ram Pickup 1500
Sep 05, 2011 | 1985 Dodge Ramcharger
Jul 27, 2011 | 1984 Dodge Ram 50
Aug 31, 2010 | 1984 Dodge Pickup 4WD
Mar 14, 2010 | 2005 Dodge Ram 1500
Jul 31, 2009 | 1999 Dodge Ram 2500 4WD
104 people viewed this question
Usually answered in minutes!