Question about Cars & Trucks
I have a 3.3L 1997 PLYMOUTH GRAND VOYAGER se that need to replace the water pump on. but I need a diagram or instruction on doing so.
Jack up the passenger side and remove the tire. Remove the splash shield to gain access to the belt and tensioner. Remove the serp belt. Remove the bolts holding the pulley to the water pump. Remove the pulley Remove the bolts holding the water pump to the timing cover. Remove the water pump. Be prepared for the bolts to break. It happens often!
Posted on Jul 14, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello. My name is Chuck and I owned a radiator and air conditioning repair shop for 20 years. The answer to your question is the whole dash board assembly. You need to remove everything to gain access to the evap core. I'm sorry to be the bearer of bad news .At my shop everybody wanted their a/c fixed but nobody wanted to pay the price and I can't blame them. I charged 800 to 900 bucks complete for this job and the chrysler dealer charged about 1200 plus for the same work. Good luck.
Posted on Dec 17, 2008
Go to the autozone.com website and register. It's free and will give you access to an online repair manual. The steps for replacing the water pump can be found there. Hope this helped and best wishes.
Posted on Aug 11, 2009
Testimonial: "This is great information not only have you helped me with my current problem but, potential future problems as well. Thanks,"
The BCM is located on the drivers side under the the steering column. It is behind the fuses and to get to it you have to remove the bash board plastic, than a pice of metal and than you have to remove the fuses box. It will take you approximately 20 min to remove everything. Once you remove the BCM you need to take note of the Part Number P/N. It has to be the same P/N on the replacement BCM. You can use any BCM from years 1996-2000 but make sure the electrical configuration is the same as yours (Power windows, alarms, etc.). I bought my BCM on the junk yard for 35 dollars and my car works perfectly.
I hope this may have assisted you,
Posted on Oct 30, 2009
the diagam should be located under hood,it is a pretty simple system.map,fuel pressure reg com of back of intake plenume
Posted on Mar 01, 2010
Tips for a great answer:
Dec 28, 2014 | 1993 Plymouth Grand Voyager
Sep 30, 2013 | Cars & Trucks
Nov 30, 2010 | 1997 Plymouth Grand Voyager
Sep 22, 2010 | 1997 Plymouth Voyager
May 22, 2010 | 1997 Plymouth Grand Voyager
Apr 18, 2010 | 1997 Plymouth Grand Voyager
Apr 14, 2010 | 1997 Plymouth Grand Voyager
Jan 26, 2010 | 1997 Plymouth Grand Voyager
Dec 11, 2009 | 1997 Plymouth Grand Voyager
Jun 10, 2009 | 1997 Plymouth Grand Voyager
151 people viewed this question
Usually answered in minutes!