Question about Cars & Trucks

Open Question

Knock Sensor Location Cadillac SRX

Need to replace knock sensor

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: knock sensor code, p0330

The knock sensors either work or they don't. When they do not, the light comes on. All that a knock senor is is a piezo crystal that vibrates at the frequency that is comparable to engine "knock", and sends that yes/no signal to the ECU. There are 2 knock sensors, and both are bolted to each side of the engine interior walls, under each cylinder head. You have to remove both of the intake manifolds to access the knock sensors and their wiring.
Price to pay? My flat rate book suggests 3.7 hrs to change both. 3.7 hrs times your local labour rate, plus the price of the 2 sensors and/or wiring, and the price for the gaskets for the upper & lower manifolds. Depending on your location, you could quickly spend over $500.00.

Posted on Oct 07, 2008

tripletauto
  • 1450 Answers

SOURCE: Where is the location of the knock sensor for a 2005 HD 2500 6.0

HAS TWO KNOCK SENSORS they are both under intake in valley of engine. remove intake and will see two black grommets they are under those best to replace both at same time

Posted on Jan 26, 2009

Toyota Guy
  • 42 Answers

SOURCE: Location of knock sensor on 1994 toyota 22vre engine

The Knock sensor on a 22re is located under the intake manifold on the engine block. to the upper left of the oil filter. With is the passenger side of the engine. I believe it is yellow in color. Not do be confused with the oil pressure sensor which is close by. The knock sensor has a larger electrical connector. Good luck it can be hard to get to.

Posted on May 06, 2009

  • 316 Answers

SOURCE: where is a knock sensor for 1998 Mercury Villager located?

Here is a image of it's location, I hope it helps.
8262b2e.jpg

Posted on May 18, 2009

  • 1 Answer

SOURCE: Need to locate knock sensor on 1999 camry V6. Where is located.

i have toyota windom 4vz-fe i need locate knock sensor

Posted on Aug 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 nissan sentra sx 200 knock sensor location


Melvia, Knock sensor located under the intake manifold between cylinder #2-3 I believe, hard to change with out removing intake manifold, but can be done. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1995 1999 Nissan Maxima 1 2 Knock sensor replacement
KA24DE Knock Sensor Code 34 FREE REPLACEMENT How To
Knock sensor on 1995 Altima
Get the Best Priced Nissan Sentra Knock Sensor

Aug 21, 2016 | Nissan Cars & Trucks

1 Answer

04 Chevy avalanche knock sensors location


Nathan, 2 Knock's are located under intake manifold.
Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Engine Knock Sensor 2000 06 5 3L Silverado Sierra...

Knock sensor 5 3 4 8 6 0 replacement

05 Chevy Avalanche Knock Sensors

4 8 5 3 6 0 knock sensor replacement GM



Mar 06, 2016 | Cars & Trucks

2 Answers

Location of the mass flow air sensor in a 2007 Cadillac SRX? how to replace?


Hard to believe you have a bad MAF in a 2007 caddy. How many miles on car? Have you tried cleaning the unit?

Parts store have a locator chart which should show location.

Apr 14, 2015 | 2007 Cadillac SRX

1 Answer

Where is the knock sensor located on a 2004 Cadillac srx v6 engine 3.6L


No sir, on the ly7 HFV6 3.6l in the 04-09 srx and cts the knock sensors are located on the sides of the engine block. Bank 1 and two are visible fringe wheel well. Not to hard to get to with a 3/8 drive 13mm socket, universal joint, and short extension. I would also check the connector with a multi meter while doing this job to ensure you have a good connection and harness is not damaged. Best of luck!

Mar 31, 2015 | 2004 Cadillac SRX

1 Answer

My knock sensor on my 2003 cadillac deville is faulted. How hard and what tools and supplies do I need to replace the knock sensor


  1. Remove the intake manifold.
  1. Disconnect the knock sensor electrical connector.
  1. Remove the knock sensor (KS).
Installation Procedure

    602292.png
    .
  1. Install the knock sensor.Tighten
    Tighten the knock sensor to 25 [n-m] (18 lb ft).
  2. Connect the knock sensor electrical connector.
  3. Reinstall the intake manifold.
    this is quite a job and i would not reccomend a novice mechanic to preform this repair book time is about two hours for this repair hope this helps

Oct 20, 2012 | Cadillac DeVille Cars & Trucks

1 Answer

Where is the knock sensor on a cadillac sedan


located underneath the intake manifold remove it and disconnect the knock sensor unscrew the knock sensor. installation is reverse

Feb 27, 2010 | 1996 Cadillac DeVille

2 Answers

Location of knock senor on 97 maxima se


Your knock sensor is located Under the hood, center, front engine area, below intake manifold, mounted on block.


A defective knock sensor may cause engine detonation or reduced spark advance and fuel economy. When a knock sensor is removed and replaced, the sensor must be tightened to its specified torque. If the knock sensor is installed tighter than it should be, it may become too sensitive and provide an excessively high voltage signal, resulting in more spark ****** than required. When the knock sensor is installed looser than it should be, the knock sensor signal will be lower than normal, resulting in engine detonation.

To replace the knock sensor:
  • Disconnect the knock sensor wiring connector.
  • Then, unscrew the sensor.
  • Remove the knock sensor.
  • Reverse the procedures to install the part.

May 15, 2009 | 1997 Nissan Maxima

1 Answer

1986 jetta oil pump location and replacement/knock sensor


oil pump is in the oil pan and if you have no or low oil pressure replace pump before doing anything with knock sensor. knock sensor is more or less a microphone and listens for spark knock but will set codes for any knocking or tapping noise which is commonly heard if oil pump is malfunctioning

Mar 20, 2009 | 1986 Volkswagen Jetta

1 Answer

Knock sensor location


Knock Sensor Description addthis_pub = 'car-suff'; button1-bm.gif parts-box-top-lft.gif parts-box-top-rt.gif knock-sensor.jpg parts-box-rt.gif parts-box-btm-lft.gif parts-box-btm-rt.gif A quality Knock Sensor is more important than ever thanks to today’s increasing gas prices. Your Engine Knock Sensor enables your vehicle to obtain the optimum combination of timing and fuel/air mixture to generate power and efficiency and that means less wasted gas. Our guaranteed low prices make us your one-stop Knock Sensor Location. Regardless of the brand, make or model car, truck, van or SUV you drive, we make it easy to locate the application specific Knock Sensor that’s perfect for your vehicle. Our state of the art parts locating system puts you just a few mouse clicks away from the Knock Sensor you need and at a price you cannot beat anywhere. Click. Click. Click. And you are there. In addition to robbing you of fuel economy and performance a faulty Knock Sensor can cause expensive damage to your engine. Remember, the Knock Sensor keeps fuel from detonating in the cylinder … exploding rather than quickly burning as it should. If not replaced a faulty Knock Sensor can quite literally cause hundreds if not thousands of dollars in damage. There is really no need to look any further to find the Knock Sensor that’s application specific for your car, truck, van or SUV – high performance or family vehicle. We’ve got guaranteed low prices and shipping that other suppliers envy. Give us a try, we think you’ll be happy … in fact we guarantee it.

Jun 20, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...