Question about 2008 Toyota Yaris Sedan

Open Question

Valet mode I have no idea where to find the valet switch that is referred to in the viper users guide

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I think I may have triggered an anti theft kill switch on my 03 expedition 5.4. It has a viper alarm, but I found a spare and activated the door code and now it won't start. Everything else comes on.


Free Viper Automobile Alarm User Manuals ...

auto.manualsonline.com > ... > Viper > Automotive Viper
Products 1 - 26 of 26 - Viper Automobile Alarm 135HF. Viper Auto-Security Device Owner's Manual. Pages: 0 Saves: 0. See Prices Buy or Upgrade ..

Aug 17, 2015 | Cars & Trucks

1 Answer

Car starter in valet mode


  1. 1 Insert the key into the ignition.
  2. 2 Turn the ignition switch to "ON." Do not start the engine.
  3. 3 Press and hold the valet/override button within five seconds of turning the ignition on. The valet button is located beneath the steering column.
  4. 4 Release the valet/override button after the security indicator light turns off.
  5. 5 Turn the ignition switch off.

Dec 07, 2013 | Dodge Cars & Trucks

1 Answer

Viper alarm reset code,so it will allow you to drive


Turn the key on and put it in Valet mode.

Aug 16, 2013 | 1991 Acura NSX

1 Answer

I need help! i have my alarm on valet mode and i dont know how or why its that way. how do i tke it off!!!!!!!


I have read the owners manual to my 2002 altima and the only reference to a Valet setting is it came with a key called the "valet key" (go figure) which would only run the car and not the trunk or glove box. There is a switch inside the glove box , but I haven't found the use in the book yet.

Dec 14, 2011 | 2003 Nissan Altima

1 Answer

When car battery replaced - car alarm no longer chirps when armed. However the remote does lock and unlock doors.


Sounds like your alarm is now in valet mode. Consult your alarm user's manual on how to remove it from valet mode.

Jun 29, 2011 | Hyundai XG350 Cars & Trucks

1 Answer

My remote start is not working for my car.the blue light is staying on and not flashing like its suppose too.


Somehow, your alarm has been put into valet mode. Consult your user manual to find out how to take the valet mode off.

Jan 24, 2011 | 2000 Hyundai Elantra

1 Answer

I have a viper alarm on my car that wont shut off nor i cant start the car..and i have tried the button under my dash, how Can i shut it off??


was it a professional or shade tree install? the following is off vipers website:
disarming without a remote control
This feature allows you to disarm the security system without the
Remote Control should it be lost, damaged, or disabled. In order to
disarm the system without a remote remote control, you must have
the vehicle’s ignition key and know where the Valet button is
located. Be sure to check with the installer for the location and the
number of presses of the Valet button required to disarm the system.
To disarm the security system,
turn the ignition to the ON position.
Press the Valet button the
preset number of times (one to
five times) within 15 seconds. After five seconds the system will
disarm. If the system does not disarm, you may have waited too long;
turn the ignition off and on and try again.
if that doesn't work try this other

valet mode
You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the Remote Control, but
all convenience functions (door locks, trunk release, etc.) will
continue to work normally.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
The status LED will light solidly if you are entering Valet Mode,
and it will go out if you are exiting Valet Mode.

May 08, 2010 | 1994 Honda Civic

1 Answer

Where is the valet switch for honda accord 2002 lx?


Hi,
Does the vehicle have an aftermarket alarm system? Is the valet switch for this what you are looking for? If so, it depends entirely on who installed it as where they have put it, although it's usually under the dash on the driver’s side. Some alarms have different sequences that you have to go through to put the alarm into valet mode; it's not usually just a switch that you flick. Best to pop into an alarm or stereo installer and see if they can spot it for you, or if the car is immobilized, find out what sort of alarm it is and call an installer for the info on the valet procedure.

Thank You for contacting Fixya.com

Aug 03, 2009 | 2008 Honda Accord

1 Answer

Viper Alarm System problem


Look for a push button under the dash, should be black, turn key on and hit button.. should go into "valet mode".. hopefully you will be all set...

Jan 23, 2009 | 2000 Dodge Viper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...