Question about Cars & Trucks
Not sure I follow your question. The replacement lamp assembly did not come with the wiring for the lights ?
According to the diagram, white lite green is the backup lamp, black dark green is ground, white brown is the parking light, and white dark green is the turn signal or brake light.
Posted on Jul 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here you go...
1995 Mercury Villager Car Stereo Radio Wiring Diagram
Radio Constant 12V+ Wire: Green/Purple
Radio Ignition Switched 12V+ Wire: Yellow/Black
Radio Ground Wire: Black/Light Green
Radio Illumination Wire: Green
Radio Dimmer Wire: N/A
Radio Antenna Trigger Wire: N/A
Radio Amplifier Trigger Wire: N/A
Front Speakers Size: 5′ x 7′
Front Speakers Location: Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): White/Light Green
Right Front Speaker Wire (-): Dark Green/Orange
Rear Speakers Size: 5′ x 7′
Rear Speakers Location: Side Panels
Left Rear Speaker Wire (+): Light Brown/White
Left Rear Speaker Wire (-): Light Brown/Yellow
Right Rear Speaker Wire (+): Light Brown/Green
Right Rear Speaker Wire (-): Brown/Pink
That's what they show for factory
Posted on May 31, 2009
I assume you only want lights, brake lights and signals. Your best bet is to plug a wire onto your truck... the flat plug, and turn , first the left signal, on. Use a test light to see which part of the plug in is flashing. Once you have established that, just keep plugging the other end of the wire into the trailer plug, until you get the left turn signal flashing on the trailer. Then repeat the process for lights etc.
You can also take the plug-in apart on the trailer. Inside the plug in it will have l/t, r/t, s, etc. (left turn, right turn, stop, etc.) There will be a very small arrow pointing to the terminal connection that is for each.
Posted on Nov 03, 2009
Testimonial: "Thanks, that should be an easy and sure way."
white is front left. greay is front right. green is rear left . purple is rear right. black is ground .yellow is power. red is ignition. or do u need factory wiring? the12volt.com try this website it is very helpfull
Posted on Mar 25, 2010
You need to install a 3-2 wire converter. I suggest a CURT 56175 then
1.Using a test lamp, identify the corresponding wires in the harness for the left turn, right turn, tail lights and brake lights. 3. Temporarily remove the vehicle's negative battery cable from the battery. 4. Using wire taps, attach the input wires of the tail light converter to the corresponding vehicle harness wires identified in step 2 as indicated.
Converter Brown Wire: Tail Light Circuit Converter Yellow Wire: Left Turn Circuit Converter Red Wire: Brake Light Circuit Converter Green Wire: Right Turn Circuit
5. Locate a suitable mounting location for the ground eyelet on the vehicle near the converter on vehicle's frame or cross member.
And your ready to tow!
Posted on Mar 23, 2011
SOURCE: I have broken wire harness on the back of my Heater/AC automatic climate control. The black harness on the back has 11 different colored wires. Do you know which color wires go on which pins in the ba
Check the dealer to see if they have a pig tail to wire in. if so the new pigtail should have same wire color for matching up.
Posted on Jun 14, 2012
Tips for a great answer:
Mar 17, 2015 | 2000 GMC Savana
Sep 26, 2014 | 2006 Chrysler PT Cruiser
Aug 16, 2011 | 2006 Chrysler PT Cruiser
Jun 14, 2010 | 2006 Chrysler PT Cruiser
Dec 17, 2009 | 2006 Chevrolet Impala
Sep 20, 2009 | 2006 Chrysler PT Cruiser
Jul 12, 2009 | 2006 Honda Ridgeline
May 27, 2009 | 1997 Chrysler Town & Country
Feb 22, 2009 | 2006 Mercury Mariner
Feb 02, 2009 | 2006 Chrysler PT Cruiser
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: