Question about Cars & Trucks

Open Question

Kubota l3830 head bolt toqure - Cars & Trucks

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: head bolt toqure

Hope this helps, from autozone site. Curt
Application:
Cylinder head bolt torque sequence

Note :
Torque sequence:
---------
front | 3 1 6 |
of | |
vehicle | 5 2 4 |
---------
Step 1: Lightly oil cylinder bolt threads & washers
Step 2: Torque to 22 Ft/Lbs
Step 3: Torque to 51 Ft/Lbs
Step 4: Loosen all bolts 180 degrees
Step 5: Loosen all bolts 180 degrees
Step 6: Torque bolts 1 & 2 to 25 Ft/Lbs
Step 7: Torque bolts 3, 4, 5, 6 to 11 Ft/Lbs
Step 8: Turn all bolts an additional 80 to 90 degrees
Step 9: Turn all bolts an additional 80 to 90 degrees
*** CAUTION ***
engine uses Torque To Yield head bolts (TTY) that
permanently stretch during the initial installation.
New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper Torque.

Posted on Apr 24, 2009

Ad
chuckster57
  • 1102 Answers

SOURCE: what is the head bolt toqure sequence for a 1990

Here is a picture of the torque procedure.
Bolt #11 threads must be coated with loctite 592 sealant before installation

Tighten all bolts in order to 22 Ft/Lbs.
Tighten all bolts in order to 45 Ft/Lbs
ReTighten all bolts in order to 45 Ft/Lbs
Tighten bolts 1-10 in order to 110 Ft/Lbs
Tighten bolt 11 to 100 Ft/Lbs
Tighten bolts 12-14 to 110 Ft/Lbs


chuckster57_4.gif

Posted on Dec 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the drain plug for the block drain on a Kubota engine V1902-B?


[PDF]KUBOTA DIESEL ENGINE - Waterax




waterax.com/app/uploads/2015/09/ENGINE-MANUAL-D902.pdf







engine maintenance. it is KUBOTA's policy to utilize as quickly as possible .... Be sure to close the coolant drain valve, secure the pressure cap. and fasten the .... Oil drain plug. (18) Oil ... around the machine. it may catch on moving (B) "OFF".




Kubota V2203 Block Water Drain? - Diesel Bombers




www.dieselbombers.com > ... > Diesel Engine Conversions







Nov 21, 2013 - On my Kubota V2203 DI above the Oil filter is a long bolt of which the only thing ... I did not even know that Block Water Drain was there till last night I ...Also, the pipe plugs in the engine are a Japanese style, but we've ... Kubota v2203 vsv1902, ziegler, Diesel Engine Conversions, 4, 01-10-2015 06:27 PM.




Kubota Engine Service Tips




johnsoncitykubota.com/Kubota%20Engine%20Service%20Tips.htm









If the reading is 11 volts or more while you are trying to crank the engine see the ...Other causes include defective glow plugs or low cranking speeds from a weak battery.... We have not seen it "ruin" anyone's tractor yet, so drain the tank, refill with ....passages between the cylinder head and the block became 90% blocked.




Kubota L2550 needs block heater! - Yesterday's Tractors




www.yesterdaystractors.com > Discussion Forums > Tractors











Jan 25, 2011 - 25 posts - ‎14 authors

Oldmax, I could swear I was looking at a closeup of my engine, except for the colour.... V1702, V1703, V1902, V1903, V2003, V2003T, V2203 (4 cylinder) Part No. ... BSeries (Except 2 cylinder) Part No. Watt Volt Diameter Type .... Paul, does the tractor have a block drain plug, and a thermostat bypass ...

Jan 06, 2016 | Cars & Trucks

2 Answers

What is the torque on stut bolt


strut bolt? the two bolts attaching the knuckle to the strut.
If no one knows, I would advise about 100ft-lbs.

Apr 30, 2015 | 2004 Ford Escape

2 Answers

Torque for head bolts 1996 chev


22 Ft-Lbs 264 In-Lbs 29.83 N-m Connects: Cylinder Head To Cylinder Head Years: 1996- Vote Record: Vote Note: Vortec - Head Bolts - LONG - 2 Steps: 22FtLbs; +75deg

ok if this is not what u are looking for post the size of engine

Apr 07, 2015 | 1996 Chevrolet Blazer

2 Answers

Tightening torque


toqure is a relationship betwwen peices of metal bolts and nuts depending on the hardness and flexabiltey in a combined miror
Toqure is judged not by spec but by appilaction.
Common sence will go a long way If you understand whats real and what needs to be done

Mar 21, 2015 | 2005 Hyundai Getz 1.6

1 Answer

Where can I get the toquric sequence for 2001 chevy 3.4 head bolts.


follow this link ,as i'm feeling lazy to type all the instructions needed.this will have diagrams as well
Repair Guides Engine Mechanical Components Cylinder Head AutoZone com

Oct 05, 2014 | Cars & Trucks

1 Answer

What is the head bolt toqure sequence for a 1990 jeep cherokee 4.0 I6 and the torque specs for the head bolts


Here is a picture of the torque procedure.
Bolt #11 threads must be coated with loctite 592 sealant before installation

Tighten all bolts in order to 22 Ft/Lbs.
Tighten all bolts in order to 45 Ft/Lbs
ReTighten all bolts in order to 45 Ft/Lbs
Tighten bolts 1-10 in order to 110 Ft/Lbs
Tighten bolt 11 to 100 Ft/Lbs
Tighten bolts 12-14 to 110 Ft/Lbs


chuckster57_4.gif

Dec 28, 2010 | 1998 Jeep Cherokee

1 Answer

2002 5.9 liter cummins diesel headbolt toqure specs


The head bolts should be torqued to 125foot lbs in a circular pattern

Dec 16, 2010 | Dodge Ram 2500 Cars & Trucks

1 Answer

Head bolt toqure


Hope this helps, from autozone site. Curt
Application:
Cylinder head bolt torque sequence

Note :
Torque sequence:
---------
front | 3 1 6 |
of | |
vehicle | 5 2 4 |
---------
Step 1: Lightly oil cylinder bolt threads & washers
Step 2: Torque to 22 Ft/Lbs
Step 3: Torque to 51 Ft/Lbs
Step 4: Loosen all bolts 180 degrees
Step 5: Loosen all bolts 180 degrees
Step 6: Torque bolts 1 & 2 to 25 Ft/Lbs
Step 7: Torque bolts 3, 4, 5, 6 to 11 Ft/Lbs
Step 8: Turn all bolts an additional 80 to 90 degrees
Step 9: Turn all bolts an additional 80 to 90 degrees
*** CAUTION ***
engine uses Torque To Yield head bolts (TTY) that
permanently stretch during the initial installation.
New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper Torque.

Apr 24, 2009 | 1995 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...