Question about Cars & Trucks

Open Question

Ck-009 13p keyless entry to D21 terranno

I cant find the right wires to connect the keyless entry too. also why doesn't the drivers door lock with the switch on arm rest?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
kevin000
  • 1847 Answers

SOURCE: The driver's door doesn't lock

First thing is to try passenger door (that still has key lock for '03, doesn't it?) Or the rear hatch. I'll bet it won't work there, either, unless battery is disconnected. My guess is that the remote locking is staying at "lock" - which is why it works with battery disconnected.
I haven't heard of anything just like your problem, but there have been many who have to replace the RKEM (Remote Keyless Entry Module) - it's behind the radio. Usually the doors start to lock & unlock by themselves.

Posted on Sep 17, 2008

Ad
  • 5 Answers

SOURCE: keyless entry won't work

I have a 1999 BMW E46 I have had a problem with the keyless entry myself. I brought the car to BMW Dealer and they told me that my Lock had an issue and that they need to repair some wiring wich would cost me $1,023.98 to find out that it was a fuse that burned out. I have replaced the 5 amp fuse with another one but it burned the fuse again so I put a 10 amp fuse and i have not had a problems since. In my car is fuse # 54 if Im not mistaken. But waht you can do is open the fuse box which is located in your glove compartment look for a diagram that shows you which fuse is where it will give you a fuse name a number where the fuse is located and how many amps fuse it is.

Posted on Dec 23, 2008

dr_greg
  • 192 Answers

SOURCE: Honda Civic 2002 keyless entry

inspect and or replace the drivers door lock actuator...

Posted on Apr 05, 2009

  • 77 Answers

SOURCE: keyless entry on honda civic 2006 not working

The keyless entry is designed to work with the doors closed (closed - not locked). If the door ajar sensor thinks the door is open the keyless entry is disabled. When you manually lock the door it might tighten the door just enough to activate the keyless entry. I would try slamming all the doors closed and then see if the keyless entry works. If it still wont work have the wiring checked on the front door lock.

Posted on May 12, 2009

messstat
  • 365 Answers

SOURCE: Keyless Entry won't Lock/Unlock back door

Factory keyless?

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 crown vic keyfob only works with ignition in run position .keyless entry and door locks work fine.even tried new keyfob.no change


The keyless entry system consists of the following components:
  • driver door module (DDM)
  • keyless entry transmitter
  • keyless entry keypad
The driver door module (DDM) receives inputs from the digital transmission range (TR) sensor, ignition switch, brake switch, window/door lock switches, lighting control module (LCM), keyless entry keypad switch and remote transmitter. The DDM outputs consists of keyless entry keypad switch illumination, power door lock actuators, luggage compartment release solenoid, horn relay, and lighting control module (LCM).
  • Battery junction box (BJB) fuses:
    • circuit breaker 7 (20A)
  • Central junction box (CJB)
    • 4 (10A)
    • 6 (15A)
    • 8 (25A)
    • 13 (5A)
  • Keyless entry keypad switch
  • Power door lock actuator
  • Luggage compartment release switch
  • Luggage compartment release solenoid
  • Connectors or connections
  • Wiring harness
  • If fuse's good have checked for DTC'S - diagnostic trouble codes .
  • B1526 Keyless Entry Circuit Short to Ground DDM Go To Pinpoint Test E . B1553 Decklid Release Circuit Short to Battery DDM Go To Pinpoint Test B . B1751 Park/Neutral Switch Circuit Short to Battery DDM Go To Pinpoint Test K . B2425 Remote Keyless Entry Out of Synchronization DDM Go To Pinpoint Test L Need a professional grade scan tool to check fro these codes . Not a code reader for OBD2 codes .
  • The doors do not lock/unlock using the remote transmitter
  • Remote transmitter not programmed.
  • Remote transmitter.
  • DDM.
  • Go To Pinpoint Test F .

Did you program the new key fob ?

Remote Transmitter Programming NOTE: All remote transmitters are programmable and must be set at the same time.
  1. Turn the key from OFF to RUN four times within three seconds, ending in RUN. The locks will then lock and unlock, confirming program mode has been entered.
  1. Press any button on each remote transmitter to be programmed. The doors will lock and unlock to confirm that each remote transmitter has been programmed.
  1. If additonal remote transmitters are to be programmed, repeat Step 3 within 7.5 seconds or steps 2 and 3 if more than 7.5 seconds have elapsed.
  1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
  1. NOTE: Failure to wait at least 20 seconds will cause programming failures. Wait at least 20 seconds after turning the key to OFF or after the last remote transmitter has been programmed to activate a remote transmitter for testing or verification

Feb 19, 2017 | Cars & Trucks

1 Answer

Eclipse door locks


Sorry absolutly no idea without a play

Jun 05, 2013 | Cars & Trucks

1 Answer

Keyless entry kit doesn't work


there is a positive and negative wire on your door lock motor. you need to put the purple wire to the negitve wire going to your door lock. try hooking up to just one of the door locks neg wires. if it only unlocks that door then you will need to run wires to the other doors aswell. the keyless system sends a neg pulse to unlock and lock the posiytive is constant. so unhook purple and attach to lock ground not car ground

Mar 17, 2013 | 2006 Nissan Sentra

2 Answers

Had the battery changed in 2007 nissan murano and now the chimes don't ring and the drivers doesn't automatically move back when opening the drivers door. How do I reset these?:


Disconnecting the battery erases stored memory,after you connect the battery put the key in the ignition cylinder and turn the driver door switch on(open) and off (closed), on (open),the entry,exist function then becomes complete, and the return operation can be operated,

Dec 30, 2012 | 2003 Nissan Murano

1 Answer

I have a 1998 Ford Explorer. The door lock on the driver side will not unlock the doors as it use too. I can unlock the doors from passenger side some times, but not all the time. I just had a new door...


First I suggest check and re-check wires and harnesses connections at/from door lock switches at/from drivers side, some loss or harnesses connections sometimes make this wrong.

If, before this replacement your locks system was working fine, a bad installation could damage this and other components. This could be the answer at intermitent keyless work, or your secuirty entry module is advice go to bad. There isn't way to test this, try re-sunchronized the keys according with your Owners Manual procedure o just will reprogramming with the dealer tools.

Hope this helps.

Feb 08, 2012 | 1999 Ford Explorer

1 Answer

The door lock on driver side front doesn't work anymore with the remote, the other doors are working fine on a Lincoln Ls 2004


Try using the Keyless Entry Pad

If that won't open the drivers door,
then you will need a scan tool, to see
if it can comunicate with the DDM -
Drivers Door Module.

That may be a possible problem, if
everything else works

Jun 24, 2011 | 2004 Lincoln LS

1 Answer

How do i reprogram electronic door locks


Programming Electronic Door Lock Control System NOTE: The electronic door lock control processor (14B001) erases all previous keyless entry remote transmitter (15K601) from memory when the keyless entry remote transmitters are programmed or reprogrammed. The electronic door lock control processor can store up to four keyless entry remote transmitters in memory.


  • To program (or reprogram) keyless entry remote transmitter into the electronic door lock control processor, perform the following steps:
  1. Turn ignition switch to the RUN position and momentarily short the two terminals of the program connector taped to the wire assembly and located behind the glove compartment. All doors should lock and then unlock. Remove shorting pin.
  1. Press any button on keyless entry remote transmitter. All doors should lock and then unlock to verify the keyless entry remote transmitter has been programmed. If door locks do not respond, press button again (up to three times maximum with the same keyless entry remote transmitter).
  1. Repeat the above step to program additional keyless entry remote transmitters into the electronic door lock control processor (up to four keyless entry remote transmitters maximum).
  1. Turn ignition switch OFF. All doors should lock and then unlock.
  1. Check operation.

Jun 05, 2010 | 1997 Ford Windstar

3 Answers

LHJ001 WIRING


I have the 1995-97 Lincoln Continental Alarm, Remote Starter, Keyless Entry Wiring, review it:

b94b6e9.png


Hope helped.

Oct 30, 2009 | 1996 Lincoln Continental

2 Answers

1999 Chevy Tahoe Door wiring diagram


I am not sure exactly where to get your info for free, but have another solution. The drivers door holds all you need. The door panel needs to be removed and then reconnect the power door lock switch. Then just locking and unlocking the door will trigger the actuator to move, allowing you to find it and the wires connected to it. Disconnect the wires and plug in a Digital Multi-Meter into the plug on the wire end and hit the lock and the unlock buttons to find which polarity to which wire unlocks the door and to lock it would be in reverse. Then he can wire the keyless entry into the truck via these wires and can use wire-taps which will pop over the wires in the truck and allow him to add the keyless entry w/o cutting wires. :D Have fun

Jun 07, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Keyless entry on honda civic 2006 not working


The keyless entry is designed to work with the doors closed (closed - not locked). If the door ajar sensor thinks the door is open the keyless entry is disabled. When you manually lock the door it might tighten the door just enough to activate the keyless entry. I would try slamming all the doors closed and then see if the keyless entry works. If it still wont work have the wiring checked on the front door lock.

May 12, 2009 | 2006 Honda Civic Hybrid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...