Question about 1998 Nissan Sentra

Open Question

Replace door handle connecting rod

Door handle does not open

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 978 Answers

SOURCE: 2002 Nissan Frontier door handle does not open

normally a small clip holding on handle might find it in door well ya could take far door panel off and see how it is attached

Posted on Apr 02, 2010

Testimonial: "This was the problem! Thank you!"

clifford224
  • 1975 Answers

SOURCE: my 2002 nissan altima exterior

Think there may be a bushing missing and that's also how you make adjustments as well. Below are some pictures I had from my service manual. It wasn't much but I hope it helps.


clifford224_647.gif

clifford224_648.gif

Posted on May 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Back door won,t open on my 02 avalanche


door handle broke depends on what door handle it is.if door cant be open on out side out side door handle broke.if cant open door on inside inside door handle broke.door handle clip that connects to latch rod broken.when you try open door handle not engage to latch rod.door not going open.have to replace door handle with new clip holds latch rod in place.

Jan 09, 2013 | 2002 Chevrolet Avalanche

2 Answers

How do you fix the door handel when it wont open from the ouside


the outer handle is connected to the lock with a steel rod. If the outer handle has broken or the clip that holds the rod onto that handle has broken, then thats what you need to replace. You will need to remove the inside door trim to access the locks and rods. Remove the door trim as best you can if you are unable to open the door at all and reach into the door to access the inner door lock rod. Pulling or pushing the rod should allow you to open the door and remove the trim completely.
If there is no obvious damage to the outer door lock, check where the outer door handle rod connects to the lock itself as the clips holding the rods in place can fail. If the clips have failed, replace them with new clips from the vehicle manufacturer..

Mar 10, 2011 | 1992 Buick Regal

1 Answer

Door handle outside passenger wont open door . but it does open from the inside.


The outside door handle may be broken or may have become disconnected from the rod that allows the door to open. Sometimes the ther is a plastic clip that connects the rod to the door handle and could be broken any parts store will have replacement clips. Whatever the problem is, the door panel will have to be removed to be able to inspect the condition of the door handle and parts attaching to it.

Jan 21, 2011 | 1996 Ford Explorer

3 Answers

Is there a piece that connects the door handle to the mechanism that opens the rear door on the 93 chevy suburban? our handle moves freely without opening the door


There is a rod that goes from handle to the latch. They are held in by plastic pieces that can come off. If you can somehow get the door open, you can remove the screws and pry off the door panel so you can get a better look

Apr 18, 2010 | 1993 Chevrolet Suburban

1 Answer

Car in minor frontal repair. Removed door handle LF Door, refitted, now door won't open


it sounds like the door lock mechanism that the door button rod connects to inside the door is in the locked position.
Has the rod for the door handle been connected to the lock mechanism?

May 12, 2009 | 2004 Volkswagen Golf

3 Answers

The tailgate latch on our 2006 Chevy truck is in the open positio


there are little metal rods that connect to the handle of the tailgate, just like the rods that connect your door handles to the door hinges and lock mechanism. just pop off the plastic cover over the tailgate handle and check and see if the rods are still connected to the handle.

Apr 03, 2009 | 2006 Chevrolet Silverado

1 Answer

Driver door opens from inside but not the outside


Usually have to remove inner door panel to get at it.

Mar 14, 2009 | 1994 Toyota Camry

4 Answers

Drivers side door, not opening


VERY common issue.. the handle being replaced is ok.. but the actual metal rod that connects it to the latch needs bent a little to make it more responsive, what happens is over time this rod (which is bent slightly) will straighten, and the operator pulls harder on the handle which eventually brakes.. then replacing the handle will solve it for a while, until the trend repeats itself... VERY common, I have fixed hundreds in the shop so far...

Jul 10, 2008 | 1999 GMC Suburban

Not finding what you are looking for?
1998 Nissan Sentra Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...